No. 41536 (Amendment): Rule R33-5. Other Standard Procurement Processes  

  • (Amendment)

    DAR File No.: 41536
    Filed: 04/27/2017 03:48:27 PM

    RULE ANALYSIS

    Purpose of the rule or reason for the change:

    The purpose of the changes to this rule is to correct references to the Utah Procurement Code and Administrative Rules, to correct spelling errors, to clarify language, and to bring this rule into compliance with changes made to the Utah Procurement Code by H.B. 398 which was enacted during the 2017 General Session.

    Summary of the rule or change:

    The changes to this rule include the clarification of verbiage and modifications to comply with changes to the Utah Procurement Code, such as the process for issuing a Statement of Qualifications (Section 63G-6a-410) and establishing an Approved Vendor List (Section 63G-6a-507); the deletion of Subsections R33-5-106(6) and (7) which are reorganized and incorporated into the addition of Section R33-5-106.5 which clarifies the language and brings the rule into compliance with changes made to the Utah Procurement Code; and the deletion of Section R33-5-201 to remove an unnecessary reference to the Utah Procurement Code.

    Statutory or constitutional authorization for this rule:

    • Title 63G, Chapter 6a

    Anticipated cost or savings to:

    the state budget:

    There are no anticipated costs or savings to the state budget as a result of the changes to this rule. The changes are to clarify the language of the rule and the procurement processes and to bring the rule into compliance with the statutory changes.

    local governments:

    There are no anticipated costs or savings to local government as a result of the changes to this rule. The changes are to clarify the language of the rule and the procurement processes and to bring the rule into compliance with the statutory changes.

    small businesses:

    There are no anticipated costs or savings to small businesses as a result of the changes to this rule. The changes are to clarify the language of the rule and the procurement processes and to bring the rule into compliance with the statutory changes.

    persons other than small businesses, businesses, or local governmental entities:

    There are no anticipated costs or savings to persons other than small businesses, businesses, or local government entities as a result of the changes to this rule. The changes are to clarify the language of the rule and the procurement processes and to bring the rule into compliance with the statutory changes.

    Compliance costs for affected persons:

    There are no anticipated costs to affected persons as a result of the changes to this rule. The changes are to clarify the language of the rule and the procurement processes and to bring the rule into compliance with the statutory changes.

    Comments by the department head on the fiscal impact the rule may have on businesses:

    I have reviewed the changes to this rule, and I believe that there is no potential for fiscal impacts on businesses as a result of the changes to this rule. The changes are to clarify the language of the rule and the procurement processes and to bring the rule into compliance with statutory changes.

    Jared Gardner, Procurement Policy Board Chair

    The full text of this rule may be inspected, during regular business hours, at the Office of Administrative Rules, or at:

    Administrative Services
    Purchasing and General Services
    Room 3150 STATE OFFICE BLDG
    450 N STATE ST
    SALT LAKE CITY, UT 84114-1201

    Direct questions regarding this rule to:

    Interested persons may present their views on this rule by submitting written comments to the address above no later than 5:00 p.m. on:

    06/14/2017

    This rule may become effective on:

    06/21/2017

    Authorized by:

    Kent Beers, Director

    RULE TEXT

    R33. Administrative Services, Purchasing and General Services.

    R33-5. Other Standard Procurement Processes.

    R33-5-101. Request for Information.

    In addition to the requirements of Part 5 of the Utah Procurement Code, a Request for Information should indicate the procedure for business confidentiality claims and other protections provided by the Utah Government Records and Access Management Act.

     

    R33-5-104. Small Purchases.

    (1) Small purchases shall be conducted in accordance with the requirements set forth in Section 63G-6a-506. This administrative rule provides additional requirements and procedures and must be used in conjunction with the Procurement Code.

    (2)(a) Unless otherwise required as part of another standard procurement process being used pursuant to the small purchase rule, small purchases conducted under this rule do not require a solicitation or public notice.

    (b) As set forth in the definition of "solicitation" in Utah Code 63G-6a-103, the small purchase standard procurement process does not require a solicitation to be conducted;

    (i) 63G-6a-103 "Solicitation" means an invitation for bids, request for proposals, request for statement of qualifications, or request for information.

    ([1]3) Small Purchase thresholds:

    (a) The "Individual Procurement" threshold is a maximum amount of $1,000 for a procurement item;

    (i) For individual procurement item(s) costing up to $1,000, a procurement unit may select the best source by direct award and without seeking competitive bids or quotes.

    (b) The single procurement aggregate threshold is a maximum amount of $5,000 for multiple procurement item(s) purchased from one source at one time; and

    (c) The annual cumulative threshold from the same source is a maximum amount of $50,000.

    ([2]4) Whenever practicable, the Division of Purchasing and General Services and procurement units shall use a rotation system or other system designed to allow for competition when using the small purchases process.

     

    R33-5-105. Small Purchases Threshold for Design Professional Services.

    (1) The small purchase threshold for design professional services is a maximum amount of $100,000.

    (2) Design professional services may be procured up to a maximum of $100,000, by direct negotiation after reviewing the qualifications of a minimum of three design professional firms.

    (3) (a) Approved Vendor List: In order to ensure the fair and quitable treatment of all vendors on an approved vendor list, a procurement unit shall when[When] using this rule in conjunction with an approved vendor list,[the procurement unit shall] select a minimum of three design professional firms[identified in Subsection (2)] from the approved vendor list using one or more of the following methods:

    ([a]i) A rotation system, organized alphabetically, numerically, or randomly;

    ([b]ii) Assignment of vendors to a specified geographic area;

    ([c]iii) Assignment of vendors based on each vendor's particular expertise or field; or

    ([d]iv) Another method approved by the chief procurement officer or head of a procurement unit with independent procurement authority;

    (b) After selecting a minimum of three firms from the approved vendor list using one of the methods specified in Subsection (3)(a), the procurement unit shall rank the firms in order and begin fee negotiations, up to $100,000, with the highest ranked firm. If an agreement cannot be reached with the highest ranked firm, the procurement unit shall move to the next highest ranked firm and so on until a fee agreement is reached;

    (c) If a fee agreement cannot be reached with the first group of firms selected, the procurement unit may select additional firms from the approved vendor list using the same process set forth in subsection (3)(a) and (b) or the procurement unit may cancel the procurement;

    (d) Each procurement unit using an approved vendor list under this rule shall document that all vendors on the approved vendor list have a fair and equitable opportunity to obtain a contract;

    (4) A procurement unit shall include minimum specifications when using the small purchase threshold for design professional services.

    (5) Executive Branch procurement units, to the extent they do not have independent procurement authority, shall involve the Division of Purchasing in the qualification process described under Section 63G-6a-410, the approved vendor list process described under Section 63G-6a-507, and the evaluation and fee negotiation process described in Part 15 of the Utah Procurement Code in the procurement of design professional services.

    (6) A procurement unit using this rule must comply with the following:

    (a) Utah Code 63G-6a-506(8) -- Prohibition against dividing a procurement into one or more smaller procurements;

    (b) Utah Code 63G-6a, Part 24 -- Unlawful Conduct and Penalties;

    (c) R33-24-104 -- Socialization with Vendors and Contractors;

    (d) R33-24-105 -- Financial Conflict of Interests Prohibited;

    (e) R33-24-106 -- Personal Relationship, Favoritism, or Bias Participation Prohibitions; and

    (f) All other applicable laws and rules.

     

    R33-5-106. Small Purchases Threshold for Construction Projects.

    (1) The small construction project threshold per individual project is a maximum of $[2,500,000]100,000 for direct construction costs, including design and allowable furniture or equipment costs;

    (2) A procurement unit shall include minimum specifications when using the small purchases threshold for construction projects.

    (3) Executive Branch procurement units, to the extent they do not have independent procurement authority, shall involve the Division of Purchasing in the qualification process described under Section 63G-6a-410, the approved vendor list process described under Section 63G-6a-507, and the obtaining of quotes, bids or proposals in the procurement of small construction projects.

    (4) The chief procurement officer, or as applicable, the head of a procurement unit with independent procurement authority, may procure individual small construction projects up to a maximum of $25,000 by direct award without seeking competitive bids or quotes after documenting that all building code approvals, licensing requirements, permitting and other construction related requirements are met. The awarded contractor must certify that it is capable of meeting the minimum specifications of the project.

    (5) The chief procurement officer, or as applicable, the head of a procurement unit with independent procurement authority, may procure individual small construction projects costing more than $25,000 up to a maximum of $100,000 by obtaining a minimum of two competitive quotes that include minimum specifications and shall award to the contractor with the lowest quote that meets the specifications after documenting that all applicable building code approvals, licensing requirements, permitting and other construction related requirements are met.

    [(6) When using this rule in conjunction with an approved vendor list, the procurement unit shall select vendors and contractors identified in Subsections (4) and (5) from the approved vendor list using one or more of the following methods:

    (a) A rotation system, organized alphabetically, numerically, or randomly;

    (b) Assignment of vendors to a specified geographic area;

    (c) Assignment of vendors based on each vendor's particular expertise or field;

    (d) Invite all contractors on the approved vendor list to submit quotes, applicable to Subsection (5) only; or

    (e) Another method approved by the chief procurement officer or head of a procurement unit with independent procurement authority;

    (7) Under this rule, the chief procurement officer or head of a procurement unit with independent procurement authority shall procure small construction projects costing more than $100,000 up to a maximum of $2.5 million through a two-stage process. Stage one, qualify vendors under Section 63G-6a-410 and develop an Approved Vendor List under Section 63G-6a-507. Stage two, issue to all vendors, qualified and approved in stage one, an invitation for bids or request for proposals and use the procedures set forth therein to award a contract.]

    (8) A procurement unit using this rule must comply with the following:

    (a) Utah Code 63G-6a-506(8) -- Prohibition against dividing a procurement into one or more smaller procurements;

    (b) Utah Code 63G-6a, Part 24 -- Unlawful Conduct and Penalties;

    (c) R33-24-104 -- Socialization with Vendors and Contractors;

    (d) R33-24-105 -- Financial Conflict of Interests Prohibited;

    (e) R33-24-106 -- Personal Relationship, Favoritism, or Bias Participation Prohibitions; and

    (f) All other applicable laws and rules.

     

    R33-5-106.5. Small Purchases Threshold for Construction Projects Using An Approved Vendor List.

    (1) The small construction project threshold per individual project using an approved vendor list is a maximum of $2,500,000 for direct construction costs, including design and allowable furniture or equipment costs;

    (2) Approved Vendor List: In order to ensure the fair and equitable treatment of all vendors on an approved vendor list, a procurement unit shall:

    (a) For individual construction projects up to a maximum of $25,000 contract with a vendor/contractor by direct award using on of the following methods to select the vendor/contractor:

    (i) A rotation system, organized alphabetically, numerically, or randomly;

    (ii) Assignment of vendors to a specified geographic area;

    (iii) Assignment of vendors based on each vendor's particular expertise or field; or

    (iv) Another method approved by the chief procurement officer or head of a procurement unit with independent procurement authority;

    (b) For individual construction projects over $25,000 up to a maximum of $100,000 by obtaining a minimum of two competitive quotes from vendor/contractors on the approved vendor list;

    (i) Procurement units shall use one of the following methods to select vendors from whom quotes are obtained:

    (A) A rotation system, organized alphabetically, numerically, or randomly;

    (B) Assignment of vendors to a specified geographic area;

    (C) Assignment of vendors based on each vendor's particular expertise or field; or

    (D) Another method approved by the chief procurement officer or head of a procurement unit with independent procurement authority;

    (ii) When using one of the methods listed in Subsection (2)(b) to select vendors to provide quotes, a procurement unit may also obtain an additional quote from the vendor that provided the lowest quote on the most recently completed procurement conducted by the procurement unit using the approved vendor list;

    (iii) When quotes or bids are obtained under subsection (2)(b), procurement units shall purchase the procurement item from the vendor/contractor on the approved vendor list that provides the lowest quote for the procurement item; or

    (c) For individual construction projects over $100,000 up to a maximum of $2.5 million, by inviting all vendors/contractor on the approved vendor list to submit bids in accordance with the provisions set forth in Utah Code 63G-6a, Part 6, except public notice requirements in Part 6 are waived.

     

    R33-5-107. Quotes for Small Purchases from $1,001 to $50,000.

    (1) For procurement item(s) where the cost is greater than $1,000 but up to a maximum of $5,000, a procurement unit shall obtain a minimum of two competitive quotes that include minimum specifications and shall purchase the procurement item from the responsible vendor offering the lowest quote that meets the specifications.

    (2) For procurement item(s) where the cost is greater than $5,000 up to a maximum of $50,000, a procurement unit with independent procurement authority or the Division of Purchasing and General Services on behalf of an executive branch procurement unit without independent procurement authority, as applicable, shall obtain a minimum of two competitive quotes that include minimum specifications and shall purchase the procurement item from the responsible vendor offering the lowest quote that meets the specifications.

    (3) For procurement item(s) costing over $50,000, a procurement unit with independent procurement authority or the Division of Purchasing and General Services on behalf of an executive branch procurement unit without independent procurement authority, as applicable, shall conduct an invitation for bids or other procurement process outlined in the Utah Procurement Code.

    (4) Limited Purchasing Delegation for Small Purchases. The Division of Purchasing and General Services may delegate limited purchasing authority for small purchases costing more than $5,000 up to a maximum of $50,000, to an executive branch procurement unit provided that the executive branch procurement unit enters into an agreement with the Division outlining the duties and responsibilities of the unit to comply with applicable laws, rules, policies and other requirements of the Division.

    (5) The names of the vendors offering quotations and bids and the date and amount of each quotation or bid shall be recorded and maintained as a governmental record.

    (6) A procurement unit using this rule must comply with the following:

    (a) Utah Code 63G-6a-506(8) -- Prohibition against dividing a procurement into one or more smaller procurements;

    (b) Utah Code 63G-6a, Part 24 -- Unlawful Conduct and Penalties;

    (c) R33-24-104 -- Socialization with Vendors and Contractors;

    (d) R33-24-105 -- Financial Conflict of Interests Prohibited;

    (e) R33-24-106 -- Personal Relationship, Favoritism, or Bias Participation Prohibitions; and

    (f) All other applicable laws and rules.

    (7) (a) Approved Vendor List: In order to ensure the fair and quitable treatment of all vendors on an approved vendor list,[When]a procurement unit shall, when using this rule in conjunction with an approved vendor list, [the procurement unit shall select vendors from ]obtain a minimum of two quotes from vendors on the approved vendor list using one or more of the following methods to select vendors from whom to obtain quotes:

    ([a]i) A rotation system, organized alphabetically, numerically, or randomly;

    ([b]ii) Assignment of vendors to a specified geographic area;

    ([c]iii) Assignment of vendors based on each vendor's particular expertise or field; or

    [(d) Invite all vendors on the approved vendor list to submit quotes; or

    ]([e]iv) Another method approved by the chief procurement officer or head of a procurement unit with independent procurement authority;

    (b) Each procurement unit using an approved vendor list under this rule shall document that all vendors on the approved vendor list have a fair and equitable opportunity to obtain a contract;

    (c) When using one of the methods listed in Subsection (7)(a) to select vendors to provide quotes, a procurement unit may also obtain an additional quote from the vendor that provided the lowest quote on the most recently completed procurement conducted by the procurement unit using the approved vendor list;

    (d) Whenever practicable, procurement units may obtain quotes from all vendors on an approved vendor list; and

    (e) Procurement units shall purchase the procurement item from the vendor on the approved vendor list that provides the lowest quote for the procurement item.

     

    R33-5-108. Small Purchases of Professional Service Providers and Consultants.

    (1) The small purchase threshold for professional service providers and consultants is a maximum amount of $100,000.

    (2) [After reviewing the qualifications of a minimum of two professional service providers or consultants, the chief procurement officer, or as applicable, the head of a procurement unit with independent procurement authority, may obtain professional services or consulting services:

    (a) up to a maximum of $50,000 by direct negotiation; or

    (b) over $50,000 up to a maximum of $100,000 by obtaining a minimum of two quotes]Professional service providers and consultants may be procured up to a maximum of $100,000, by direct negotiation after reviewing the qualifications of a minimum of three firms or individuals.

    (3) (a) Approved Vendor List: In order to ensure the fair and equitable treatment of all vendors on an approved vendor list, a procurement unit shall, [W]when using this rule in conjunction with an approved vendor list, [the procurement unit shall ]select a minimum of three professional service providers or consultants[contractors] from the approved vendor list using one or more of the following methods:

    ([a]i) A rotation system, organized alphabetically, numerically, or randomly;

    ([b]ii) Assignment of vendors to a specified geographic area;

    ([c]iii) Assignment of vendors based on each vendor's particular expertise or field;

    [(d) Invite all vendors on the approved vendor list to submit quotes; or]

    ([e]iv) Another method approved by the chief procurement officer or head of a procurement unit with independent procurement authority;

    (b) After selecting a minimum of three firms or individuals from the approved vendor list using one of the methods specified in Subsection (3)(a), the procurement unit shall rank the firms or individuals in order and award a contract via direct award up to $100,000 to the highest ranked firm or individual.

    (4) Executive Branch procurement units, to the extent they do not have independent procurement authority, shall involve the Division of Purchasing at the beginning of the quote or solicitation process, in the procurement of professional services or consulting services.

    (5) A procurement unit using this rule must comply with the following:

    (a) Utah Code 63G-6a-506(8) -- Prohibition against dividing a procurement into one or more smaller procurements;

    (b) Utah Code 63G-6a, Part 24 -- Unlawful Conduct and Penalties;

    (c) R33-24-104 -- Socialization with Vendors and Contractors;

    (d) R33-24-105 -- Financial Conflict of Interests Prohibited;

    (e) R33-24-106 -- Personal Relationship, Favoritism, or Bias Participation Prohibitions;

    (f) R33-4-103(3) -- Persons with a conflict of interest, or who anticipate responding to the proposal for which the specifications are written, may not participate in writing specifications; and

    (g) All other applicable laws and rules.

     

    [R33-5-201. Approved Vendor List.

    In accordance with the provisions set forth in Section 63G-6a-507, a procurement unit may establish an approved vendor list and award contracts using the following methods and all associated laws and rules:

    (a) Section 63G-6a-113 and 507(6)(b), Contract Award Based on Established Terms;

    (b) Section 63G-6a-609, Multiple Stage Bidding Process;

    (c) Section 63G-6a-710, Multiple Stage RFP Process;

    (d) Section 63G-6a, Part 15, Design Professional Services; or

    (e) Section 63G-6a-506, Small Purchases.]

     

    R33-5-202. Contract Award Based on Established Terms.

    (1) In accordance with Section 63G-6a-113 and 507(6)(b), a procurement unit may award a contract to a vendor on an approved vendor list at an established price based on:

    (a) A price list, rate schedule, or pricing catalog:

    (i) Submitted by a vendor and accepted by the procurement unit; or

    (ii) Mandated by the procurement unit or a federal agency; or

    (b) A federal regulation for a health and human services program.

    (2) Established terms submitted by vendors on an approved vendor list:

    (a) When awarding a contract to an approved vendor based on a price list, rate schedule, or pricing catalog submitted by the vendor, the procurement unit shall, as applicable:

    (i) Assign work or purchase from the approved vendor with the lowest price, rate or catalog price;

    (A) In case of a tie for the lowest price, the procurement unit shall follow the process described in Section R33-6-111 to resolve tie; and

    (B) If the lowest-cost approved vendor cannot provide the procurement item or quantity needed, then work shall be assigned or the purchase made from the next lowest-cost vendor, and so on, until the procurement unit's needs are met;

    (ii) Establish a cost threshold based on cost analysis as set forth in Section R33-12-603 and 604, and assign work or purchase from an approved vendor meeting the cost threshold using one of the following methods:

    (A) A rotation system, organized alphabetically, numerically, or randomly;

    (B) Assignment of vendors to a specified geographic area;

    (C) Assignment of vendors based on each vendor's particular expertise or field; or

    (D) Another method approved by the chief procurement officer or head of a procurement unit with independent procurement authority; and

    (iii) In accordance with Section 63G-6a-1206.5, an approved vendor may lower its price, rate, or catalog price at any time during the time a contract is in effect in order to be assigned work or receive purchases under Subsections (i) and (ii).

    (3) Established terms mandated by procurement unit or federal agency:

    (a) When awarding a contract to an approved vendor based on a price list, rate schedule, or pricing catalog mandated by the procurement unit or a federal agency, the procurement unit shall use one of the following methods to assign work or purchase from a vendor on an approved vendor list:

    (i) A rotation system, organized alphabetically, numerically, or randomly;

    (ii) Assignment of vendors to a specified geographic area;

    (iii) Assignment of vendors based on each vendor's particular expertise or field; or

    (iv) Another method approved by the chief procurement officer or head of a procurement unit with independent procurement authority;

    (4) When awarding a contract to an approved vendor based on a price list, rate schedule, or pricing catalog based on a federal regulation for a health and human services program the procurement unit shall follow the requirements set forth in the applicable federal regulation to assign work or make a purchase.

    (5) In accordance with the provisions set forth in Section 63G-6a-2105, the chief procurement officer may award a contract(s) to vendors on an approved vendor list on a statewide, regional, or combined statewide and regional basis.

     

    R33-5-203. Performance Rating System for Vendors on an Approved Vendor List.

    (1) A procurement unit may develop a performance rating system to evaluate the performance of vendors on an approved vendor list, provided the performance rating system is described in the Request for Statement of Qualifications used to establish the approved vendor list. and includes:

    (a) The minimum performance rating threshold that approved vendors must achieve in order to remain on the approved vendor list; and

    (b) A statement indicating that vendors whose performance does not meet the minimum performance rating threshold may be disqualified and removed from the approved vendor list.

    (2) A procurement unit that disqualifies and removes a vendor from an approved vendor list shall:

    (a) Make a written finding that:

    (i) Describes the performance rating system;

    (ii) Identifies the minimum performance rating threshold; and

    (iii) Explains the performance rating achieved by the disqualified vendor; and

    (b) Provide a copy of the written finding to the disqualified vendor.

     

    R33-5-204. Approved Vendor Lists -- Using Small Purchase Process.

    (1) When awarding a contract to an approved vendor using the small purchasing process, the procurement unit shall follow the small purchase requirements set forth in Section 63G-6a-506 and the following Administrative Rules as applicable:

    (a) Section R33-5-104. Small Purchases

    (b) Section R33-5-105. Small Purchases Threshold for Design Professional Services;

    (c) Section R33-5-106. Small Purchases Threshold for Construction Projects;

    (d) Section R33-5-107. Quotes for Small Purchases from $1,001, to $50,000;

    (e) Section R33-5-108. Small Purchases of Professional Service Providers and Consultants;

    (2) Executive branch employees are required to use state contracts for all small purchases for procurement items available on state contract.

     

    KEY: government purchasing, procurements, request for information

    Date of Enactment or Last Substantive Amendment: [August 22, 2016]2017

    Notice of Continuation: July 8, 2014

    Authorizing, and Implemented or Interpreted Law: 63G-6a


Document Information

Effective Date:
6/21/2017
Publication Date:
05/15/2017
Type:
Notices of Proposed Rules
Filed Date:
04/27/2017
Agencies:
Administrative Services, Purchasing and General Services
Rulemaking Authority:

Title 63G, Chapter 6a

Authorized By:
Kent Beers, Director
DAR File No.:
41536
Summary:
The changes to this rule include the clarification of verbiage and modifications to comply with changes to the Utah Procurement Code, such as the process for issuing a Statement of Qualifications (Section 63G-6a-410) and establishing an Approved Vendor List (Section 63G-6a-507); the deletion of Subsections R33-5-106(6) and (7) which are reorganized and incorporated into the addition of Section R33-5-106.5 which clarifies the language and brings the rule into compliance with changes made to the ...
CodeNo:
R33-5
CodeName:
{42964|R33-5|R33-5. Other Standard Procurement Processes}
Link Address:
Administrative ServicesPurchasing and General ServicesRoom 3150 STATE OFFICE BLDG450 N STATE STSALT LAKE CITY, UT 84114-1201
Link Way:

Alan Bachman, by phone at 801-538-3105, by FAX at 801-538-3313, or by Internet E-mail at abachman@utah.gov

Kent Beers, by phone at 801-538-3143, by FAX at 801-538-3882, or by Internet E-mail at kbeers@utah.gov

Jared Gardner, by phone at 385-646-4561, by FAX at , or by Internet E-mail at jbgardner@graniteschools.org

Simone Rudas, by phone at 801-538-3240, by FAX at , or by Internet E-mail at srudas@utah.gov

Fay Tan, by phone at 801-538-3524, by FAX at , or by Internet E-mail at ftan@utah.gov

AdditionalInfo:
More information about a Notice of Proposed Rule is available online. The Portable Document Format (PDF) version of the Bulletin is the official version. The PDF version of this issue is available at https://rules.utah.gov/publicat/bull_pdf/2017/b20170515.pdf. The HTML edition of the Bulletin is a convenience copy. Any discrepancy between the PDF version and HTML version is resolved in favor of the PDF version. Text to be deleted is struck through and surrounded by brackets ([example]). Text ...
Related Chapter/Rule NO.: (1)
R33-5. Construction and Architect-Engineer Selection.