R714-160-14. Electrical System

  (1) When inspecting the electrical system of a vehicle, the inspector shall:

  (a) check the horn; and

  (i) advise the customer when the horn is not securely fastened; or

  (ii) issue a rejection inspection certificate when the horn does not function properly or is not audible under normal conditions at a distance of at least 200 feet;

  (b) check the electrical switches and wiring; and

  (i) advise the customer when:

  (A) electrical switches fail to function as designed for OEM required equipment;

  (B) connections show signs of corrosion; or

  (C) permanent connection wires are not soldered and insulated; or

  (ii) issue a rejection inspection certificate when wiring insulation is worn or rubbed bare;

  (c) check the automatic or manual transmission safety starting switch; and

  (i) issue a rejection inspection certificate when:

  (A) the starter operates in any gear other than "P" or "N" for an automatic transmission; or

  (B) the vehicle starter operates without the clutch depressed for a manual transmission, when equipped with a neutral safety switch; and

  (d) check for battery securement; and

  (i) issue a rejection inspection certificate when a battery is not properly secured.