R307-350-5. VOC Content Limits

  (1) No owner or operator shall apply coatings with a VOC content greater than the amounts specified in Table 1, unless the owner or operator uses an add-on control device as specified in R307-350-8.

TABLE 1

METAL PARTS AND PRODUCTS VOC CONTENT LIMITS

(values in pounds of VOC per gallon of coating, minus water and

exempt solvents (compounds not classified as VOC as defined in

R307-101-2), as applied)

Coating Category VOC Content Limits (lb/gal)

                              Air Dried Baked

General One Component 2.8 2.3

General Multi Component 2.8 2.3

Camouflage 3.5 3.5

Electric-Insulating 3.5 3.5

varnish

Etching Filler 3.5 3.5

Extreme High-Gloss 3.5 3.0

Extreme Performance 3.5 3.0

Heat-Resistant 3.5 3.0

High-Performance 6.2 6.2

architectural

High-Temperature 3.5 3.5

Metallic 3.5 3.5

Military Specification 2.8 2.3

Mold-Seal 3.5 3.5

Pan Backing 3.5 3.5

Prefabricated Architectural 3.5 2.3

Multi-Component

Prefabricated Architectural 3.5 2.3

One-Component

Pretreatment Coatings 3.5 3.5

Repair and Touch Up 3.5 3.0

Silicone Release 3.5 3.5

Solar-Absorbent 3.5 3.0

Vacuum-Metalizing 3.5 3.5

Drum Coating, New, Exterior 2.8 2.8

Drum Coating, New, Interior 3.5 3.5

Drum Coating, Reconditioned, 3.5 3.5

Exterior

Drum Coating, Reconditioned, 4.2 4.2

Interior

  (2) If more than one content limit indicated in this section applies to a specific coating, then the most stringent content limit shall apply.