R914-1. Rules and Regulations  


R914-1-1. Purpose and Authority
Latest version.

The purpose of this rule is to regulate the use, licensing and supervision of airports, govern the establishment, location and use of air navigational aids, and establish minimum standards for operational safety as authorized and required by Section 72-10-103.


R914-1-2. Definitions
Latest version.

  As used in this rule:

  (1) "Department" means the Utah Department of Transportation;

  (2) "FAA" means the Federal Aviation Administration; and

  (3) Division means the Aeronautical Operations Division.


R914-1-3. Establishment and Location of Navigational Aids
Latest version.

  Procedure.

  (1) Location site is selected.

  (2) Site is surveyed for location and elevation.

  (3) Selected site is submitted to the FAA for approval.

  (4) Upon receiving FAA approval, navigational aid may be installed.

  (5) After installation, navigational aid is checked and certified for operation by the FAA.


R914-1-4. Operational Safety
Latest version.

  In order to enhance the safety of aircraft operations and protect people and property, the Department imposes the following operational safety rules.

  (1) All pilots operating aircraft in the State of Utah will comply with applicable Federal Aviation Regulations.

  (2) Obstruction to flight. Any obstacle or structure which obstructs the airspace above the ground or water level which is determined to be a hazard to the safe flight of aircraft shall be plainly marked, lighted or removed.

  (3) Determination of obstruction. When an obstacle or structure is determined to be a hazard to flight, the owner will be notified and will have ten days after receipt of the notice to take action to correct the hazard or appeal the determination to the Department.