R392-700-10. Tanning Facility Sanitation

(1) The operator shall maintain in good repair and in a sanitary condition all portions of the tanning facility, including wall, floors, ceilings, and equipment.

(2) The operator shall clean and sanitize before each use, all:

(a) reusable protective eye wear;

(b) body contact surfaces of the tanning device; and

(c) body contact surfaces of the tanning booth, including all seating surfaces and door knobs.

(3) The operator shall clean the items in subsection (2) using a detergent or other agent able to emulsify oils and hold dirt in suspension using a concentration as indicated by the detergent or other agent manufacturer's use directions included on the product labeling. The operator shall sanitize the items in subsection (2) with a chlorine sanitizer or a quaternary ammonia compound using a concentration as indicated by the sanitizer or compound manufacturer's use directions included on the product labeling.

(4) If the operator cleans the items in a separate process from sanitizing the items, the operator shall clean the items prior to sanitizing them. The operator may use a single product to both clean and sanitize if that product meets the requirements of subsection (3) for the cleaning and sanitizing of the items in subsection (2).

(5) The operator shall ensure that restroom facilities are maintained in a clean and sanitary condition. The operator shall provide hand soap and single use hand drying towels or a hand drying mechanism for patron use.

(6) The operator shall clean and sanitize towels or other linens after each use.