R315-262-217. Appendix to Rule R315-262 -- Uniform Hazardous Waste Manifest and Instructions (EPA Forms 8700-22 and 8700-22A and Their Instructions)

  U.S. EPA Forms 8700-22 and Manifest Continuation Sheet (EPA Form 8700-22A) found in appendix to 40 CFR 262, 2015 edition, are incorporated and incorporated by reference.

  Read all instructions before completing this form.

  1. This form has been designed for use on a 12-pitch (elite) typewriter which is also compatible with standard computer printers; a firm point pen may also be used - press down hard.

  2. Federal regulations require generators and transporters of hazardous waste and owners or operators of hazardous waste treatment, storage, and disposal facilities to complete this form (FORM 8700-22) and, if necessary, the continuation sheet (FORM 8700-22A) for both inter- and intrastate transportation of hazardous waste.

  Manifest 8700-22

  The following statement shall be included with each Uniform Hazardous Waste Manifest, either on the form, in the instructions to the form, or accompanying the form:

  Public reporting burden for this collection of information is estimated to average: 30 minutes for generators, 10 minutes for transporters, and 25 minutes for owners or operators of treatment, storage, and disposal facilities. This includes time for reviewing instructions, gathering data, completing, reviewing and transmitting the form. Any correspondence regarding the PRA burden statement for the manifest shall be sent to the Director of the Collection Strategies Division in EPA's Office of Information Collection at the following address: U.S. Environmental Protection Agency (2822T), 1200 Pennsylvania Ave., NW., Washington, DC 20460. Do not send the completed form to this address.

  I. Instructions for Generators

  Manifest 8700-22

  The following statement shall be included with each Uniform Hazardous Waste Manifest, either on the form, in the instructions to the form, or accompanying the form:

  Public reporting burden for this collection of information is estimated to average: 30 minutes for generators, 10 minutes for transporters, and 25 minutes for owners or operators of treatment, storage, and disposal facilities. This includes time for reviewing instructions, gathering data, completing, reviewing and transmitting the form. Send comments regarding the burden estimate, including suggestions for reducing this burden, to: Chief, Information Policy Branch (2136), U.S. Environmental Protection Agency, Ariel Rios Building; 1200 Pennsylvania Ave., NW., Washington, DC 20460; and to the Office of Information and Regulatory Affairs, Office of Management and Budget, Washington, DC 20503.

  Item 1. Generator's U.S. EPA Identification Number

  Enter the generator's U.S. EPA twelve digit identification number, or the State generator identification number if the generator site does not have an EPA identification number.

  Item 2. Page 1 of _

  Enter the total number of pages used to complete this Manifest (i.e., the first page (EPA Form 8700-22) plus the number of Continuation Sheets (EPA Form 8700-22A), if any).

  Item 3. Emergency Response Phone Number

  Enter a phone number for which emergency response information can be obtained in the event of an incident during transportation. The emergency response phone number shall:

  1. Be the number of the generator or the number of an agency or organization who is capable of and accepts responsibility for providing detailed information about the shipment;

  2. Reach a phone that is monitored 24 hours a day at all times the waste is in transportation (including transportation related storage); and

  3. Reach someone who is either knowledgeable of the hazardous waste being shipped and has comprehensive emergency response and spill cleanup/incident mitigation information for the material being shipped or has immediate access to a person who has that knowledge and information about the shipment.

  Note: Emergency Response phone number information should only be entered in Item 3 when there is one phone number that applies to all the waste materials described in Item 9b. If a situation (e.g., consolidated shipments) arises where more than one Emergency Response phone number applies to the various wastes listed on the manifest, the phone numbers associated with each specific material should be entered after its description in Item 9b.

  Item 4. Manifest Tracking Number

  This unique tracking number shall be pre-printed on the manifest by the forms printer.

  Item 5. Generator's Mailing Address, Phone Number and Site Address

  Enter the name of the generator, the mailing address to which the completed manifest signed by the designated facility should be mailed, and the generator's telephone number. Note, the telephone number (including area code) should be the normal business number for the generator, or the number where the generator or his authorized agent may be reached to provide instructions in the event the designated and/or alternate (if any) facility rejects some or all of the shipment. Also enter the physical site address from which the shipment originates only if this address is different than the mailing address.

  Item 6. Transporter 1 Company Name, and U.S. EPA ID Number

  Enter the company name and U.S. EPA ID number of the first transporter who will transport the waste. Vehicle or driver information may not be entered here.

  Item 7. Transporter 2 Company Name and U.S. EPA ID Number

  If applicable, enter the company name and U.S. EPA ID number of the second transporter who will transport the waste. Vehicle or driver information may not be entered here.

  If more than two transporters are needed, use a Continuation Sheet(s) (EPA Form 8700-22A).

  Item 8. Designated Facility Name, Site Address, and U.S. EPA ID Number

  Enter the company name and site address of the facility designated to receive the waste listed on this manifest. Also enter the facility's phone number and the U.S. EPA twelve digit identification number of the facility.

  Item 9. U.S. DOT Description (Including Proper Shipping Name, Hazard Class or Division, Identification Number, and Packing Group)

  Item 9a. If the wastes identified in Item 9b consist of both hazardous and nonhazardous materials, then identify the hazardous materials by entering an "X" in this Item next to the corresponding hazardous material identified in Item 9b.

  If applicable, enter the name of the person accepting the waste on behalf of the second transporter. That person shall acknowledge acceptance of the waste described on the manifest by signing and entering the date of receipt.

  Item 9b. Enter the U.S. DOT Proper Shipping Name, Hazard Class or Division, Identification Number (UN/NA) and Packing Group for each waste as identified in 49 CFR 172. Include technical name(s) and reportable quantity references, if applicable.

  Note: If additional space is needed for waste descriptions, enter these additional descriptions in Item 27 on the Continuation Sheet (EPA Form 8700-22A). Also, if more than one Emergency Response phone number applies to the various wastes described in either Item 9b or Item 27, enter applicable Emergency Response phone numbers immediately following the shipping descriptions for those Items.

  Item 10. Containers (Number and Type)

  Enter the number of containers for each waste and the appropriate abbreviation from Table I (below) for the type of container.

TABLE I

Types of Containers

BA = Burlap, cloth, paper, or plastic bags.

CF = Fiber or plastic boxes, cartons, cases.

CM = Metal boxes, cartons, cases (including roll-offs).

CW = Wooden boxes, cartons, cases.

CY = Cylinders.

DF = Fiberboard or plastic drums, barrels, kegs.

DM = Metal drums, barrels, kegs.

DT = Dump truck.

DW = Wooden drums, barrels, kegs.

HG = Hopper or gondola cars.

TC = Tank cars.

TP = Portable tanks.

TT = Cargo tanks (tank trucks).

  Item 11. Total Quantity

  Enter, in designated boxes, the total quantity of waste. Round partial units to the nearest whole unit, and do not enter decimals or fractions. To the extent practical, report quantities using appropriate units of measure that will allow you to report quantities with precision. Waste quantities entered should be based on actual measurements or reasonably accurate estimates of actual quantities shipped. Container capacities are not acceptable as estimates.

  Item 12. Units of Measure (Weight/Volume)

  Enter, in designated boxes, the appropriate abbreviation from Table II (below) for the unit of measure.

TABLE II

Units of Measure

G = Gallons (liquids only).

K = Kilograms.

L = Liters (liquids only).

M = Metric Tons (1000 kilograms).

N = Cubic Meters.

P = Pounds.

T = Tons (2000 pounds).

Y = Cubic Yards.

Note: Tons, Metric Tons, Cubic Meters, and Cubic Yards should

only be reported in connection with very large bulk shipments,

such as rail cars, tank trucks, or barges.

  Item 13. Waste Codes

  Enter up to six federal and state waste codes to describe each waste stream identified in Item 9b. State waste codes that are not redundant with federal codes shall be entered here, in addition to the federal waste codes which are most representative of the properties of the waste.

  Item 14. Special Handling Instructions and Additional Information.

  1. Generators may enter any special handling or shipment-specific information necessary for the proper management or tracking of the materials under the generator's or other handler's business processes, such as waste profile numbers, container codes, bar codes, or response guide numbers. Generators also may use this space to enter additional descriptive information about their shipped materials, such as chemical names, constituent percentages, physical state, or specific gravity of wastes identified with volume units in Item 12.

  2. This space may be used to record limited types of federally required information for which there is no specific space provided on the manifest, including any alternate facility designations; the manifest tracking number of the original manifest for rejected wastes and residues that are re-shipped under a second manifest; and the specification of PCB waste descriptions and PCB out-of-service dates required under 40 CFR 761.207. Generators, however, cannot be required to enter information in this space to meet state regulatory requirements.

  Item 15. Generator's/Offeror's Certifications

  1. The generator shall read, sign, and date the waste minimization certification statement. In signing the waste minimization certification statement, those generators who have not been exempted by statute or regulation from the duty to make a waste minimization certification under section 3002(b) of RCRA are also certifying that they have complied with the waste minimization requirements. The Generator's Certification also contains the required attestation that the shipment has been properly prepared and is in proper condition for transportation (the shipper's certification). The content of the shipper's certification statement is as follows: "I hereby declare that the contents of this consignment are fully and accurately described above by the proper shipping name, and are classified, packaged, marked, and labeled/placarded, and are in all respects in proper condition for transport by highway according to applicable international and national governmental regulations. If export shipment and I am the Primary Exporter, I certify that the contents of this consignment conform to the terms of the attached EPA Acknowledgment of Consent." When a party other than the generator prepares the shipment for transportation, this party may also sign the shipper's certification statement as the offeror of the shipment.

  2. Generator or Offeror personnel may preprint the words, "On behalf of" in the signature block or may hand write this statement in the signature block prior to signing the generator/offeror certification, to indicate that the individual signs as the employee or agent of the named principal.

  Note: All of the above information except the handwritten signature required in Item 15 may be pre-printed.

  II. Instructions for International Shipment Block

  Item 16. International Shipments

  For export shipments, the primary exporter shall check the export box, and enter the point of exit (city and state) from the United States. For import shipments, the importer shall check the import box and enter the point of entry (city and state) into the United States.

  III. Instructions for Transporters

  Item 17. Transporters' Acknowledgments of Receipt

  Enter the name of the person accepting the waste on behalf of the first transporter. That person shall acknowledge acceptance of the waste described on the manifest by signing and entering the date of receipt. Only one signature per transportation company is required. Signatures are not required to track the movement of wastes in and out of transfer facilities, unless there is a change of custody between transporters.

  If applicable, enter the name of the person accepting the waste on behalf of the second transporter. That person shall acknowledge acceptance of the waste described on the manifest by signing and entering the date of receipt.

  Note: Transporters carrying imports, who are acting as importers, may have responsibilities to enter information in the International Shipments Block. Transporters carrying exports may also have responsibilities to enter information in the International Shipments Block. See above instructions for Item 16.

  IV. Instructions for Owners and Operators of Treatment, Storage, and Disposal Facilities

  Item 18. Discrepancy

  Item 18a. Discrepancy Indication Space

  1. The authorized representative of the designated (or alternate) facility's owner or operator shall note in this space any discrepancies between the waste described on the Manifest and the waste actually received at the facility. Manifest discrepancies are: significant differences (as defined by Subsections R315-264-72(b) and R315-265-72(b)), between the quantity or type of hazardous waste designated on the manifest or shipping paper, and the quantity and type of hazardous waste a facility actually receives, rejected wastes, which may be a full or partial shipment of hazardous waste that the TSDF cannot accept, or container residues, which are residues that exceed the quantity limits for "empty" containers set forth in Subsection R315-261-7(b).

  2. For rejected loads and residues (Subsections R315-264-72(d), (e), and (f), or R315-265-72(d), (e), or (f)), check the appropriate box if the shipment is a rejected load (i.e., rejected by the designated and/or alternate facility and is sent to an alternate facility or returned to the generator) or a regulated residue that cannot be removed from a container. Enter the reason for the rejection or the inability to remove the residue and a description of the waste. Also, reference the manifest tracking number for any additional manifests being used to track the rejected waste or residue shipment on the original manifest. Indicate the original manifest tracking number in Item 14, the Special Handling Block and Additional Information Block of the additional manifests.

  3. Owners or operators of facilities located in unauthorized States (i.e., states in which the U.S. EPA administers the hazardous waste management program) who cannot resolve significant differences in quantity or type within 15 days of receiving the waste shall submit to their Regional Administrator a letter with a copy of the Manifest at issue describing the discrepancy and attempts to reconcile it (Subsections R315-264-72(c) and R315-265-72(c)).

  4. Owners or operators of facilities located in authorized States (i.e., those States that have received authorization from the U.S. EPA to administer the hazardous waste management program) should contact their State agency for information on where to report discrepancies involving "significant differences" to state officials.

  Item 18b. Alternate Facility (or Generator) for Receipt of Full Load Rejections

  Enter the name, address, phone number, and EPA Identification Number of the Alternate Facility which the rejecting TSDF has designated, after consulting with the generator, to receive a fully rejected waste shipment. In the event that a fully rejected shipment is being returned to the generator, the rejecting TSDF may enter the generator's site information in this space. This field is not to be used to forward partially rejected loads or residue waste shipments.

  Item 18c. Alternate Facility (or Generator) Signature

  The authorized representative of the alternate facility (or the generator in the event of a returned shipment) shall sign and date this field of the form to acknowledge receipt of the fully rejected wastes or residues identified by the initial TSDF.

  Item 19. Hazardous Waste Report Management Method Codes

  Enter the most appropriate Hazardous Waste Report Management Method code for each waste listed in Item 9. The Hazardous Waste Report Management Method code is to be entered by the first treatment, storage, or disposal facility (TSDF) that receives the waste and is the code that best describes the way in which the waste is to be managed when received by the TSDF.

  Item 20. Designated Facility Owner or Operator Certification of Receipt (Except As Noted in Item 18a)

  Enter the name of the person receiving the waste on behalf of the owner or operator of the facility. That person shall acknowledge receipt or rejection of the waste described on the Manifest by signing and entering the date of receipt or rejection where indicated. Since the Facility Certification acknowledges receipt of the waste except as noted in the Discrepancy Space in Item 18a, the certification should be signed for both waste receipt and waste rejection, with the rejection being noted and described in the space provided in Item 18a. Fully rejected wastes may be forwarded or returned using Item 18b after consultation with the generator. Enter the name of the person accepting the waste on behalf of the owner or operator of the alternate facility or the original generator. That person shall acknowledge receipt or rejection of the waste described on the Manifest by signing and entering the date they received or rejected the waste in Item 18c. Partially rejected wastes and residues shall be re-shipped under a new manifest, to be initiated and signed by the rejecting TSDF as offeror of the shipment.

  Instructions -- Continuation Sheet, U.S. EPA Form 8700-22A

  Read all instructions before completing this form. This form has been designed for use on a 12-pitch (elite) typewriter; a firm point pen may also be used---press down hard.

  This form shall be used as a continuation sheet to U.S. EPA Form 8700-22 if:

  More than two transporters are to be used to transport the waste; or

  More space is required for the U.S. DOT descriptions and related information in Item 9 of U.S. EPA Form 8700-22.

  Federal regulations require generators and transporters of hazardous waste and owners or operators of hazardous waste treatment, storage, or disposal facilities to use the uniform hazardous waste manifest (EPA Form 8700-22) and, if necessary, this continuation sheet (EPA Form 8700-22A) for both interstate and intrastate transportation.

  Item 21. Generator's ID Number

  Enter the generator's U.S. EPA twelve digit identification number or, the State generator identification number if the generator site does not have an EPA identification number.

  Item 22. Page _---

  Enter the page number of this Continuation Sheet.

  Item 23. Manifest Tracking Number

  Enter the Manifest Tracking number from Item 4 of the Manifest form to which this continuation sheet is attached.

  Item 24. Generator's Name---

  Enter the generator's name as it appears in Item 5 on the first page of the Manifest.

  Item 25. Transporter---Company Name

  If additional transporters are used to transport the waste described on this Manifest, enter the company name of each additional transporter in the order in which they will transport the waste. Enter after the word "Transporter" the order of the transporter. For example, Transporter 3 Company Name. Also enter the U.S. EPA twelve digit identification number of the transporter described in Item 25.

  Item 26. Transporter---Company Name

  If additional transporters are used to transport the waste described on this Manifest, enter the company name of each additional transporter in the order in which they will transport the waste. Enter after the word "Transporter" the order of the transporter. For example, Transporter 4 Company Name. Each Continuation Sheet can record the names of two additional transporters. Also enter the U.S. EPA twelve digit identification number of the transporter named in Item 26.

  Item 27. U.S. D.O.T. Description Including Proper Shipping Name, Hazardous Class, and ID Number (UN/NA)

  For each row enter a sequential number under Item 27b that corresponds to the order of waste codes from one continuation sheet to the next, to reflect the total number of wastes being shipped. Refer to instructions for Item 9 of the manifest for the information to be entered.

  Item 28. Containers (No. And Type)

  Refer to the instructions for Item 10 of the manifest for information to be entered.

  Item 29. Total Quantity

  Refer to the instructions for Item 11 of the manifest form.

  Item 30. Units of Measure (Weight/Volume)

  Refer to the instructions for Item 12 of the manifest form.

  Item 31. Waste Codes

  Refer to the instructions for Item 13 of the manifest form.

  Item 32. Special Handling Instructions and Additional Information

  Refer to the instructions for Item 14 of the manifest form.

  Transporters

  Item 33. Transporter - Acknowledgment of Receipt of Materials

  Enter the same number of the Transporter as identified in Item 25. Enter also the name of the person accepting the waste on behalf of the Transporter (Company Name) identified in Item 25. That person shall acknowledge acceptance of the waste described on the Manifest by signing and entering the date of receipt.

  Item 34. Transporter - Acknowledgment of Receipt of Materials

  Enter the same number of the Transporter as identified in Item 26. Enter also the name of the person accepting the waste on behalf of the Transporter (Company Name) identified in Item 26. That person shall acknowledge acceptance of the waste described on the Manifest by signing and entering the date of receipt.

  Owner and Operators of Treatment, Storage, or Disposal Facilities

  Item 35. Discrepancy Indication Space

  Refer to Item 18. This space may be used to more fully describe information on discrepancies identified in Item 18a of the manifest form.

  Item 36. Hazardous Waste Report Management Method Codes

  For each field here, enter the sequential number that corresponds to the waste materials described under Item 27, and enter the appropriate process code that describes how the materials will be processed when received. If additional continuation sheets are attached, continue numbering the waste materials and process code fields sequentially, and enter on each sheet the process codes corresponding to the waste materials identified on that sheet.