R307-343-4. VOC Content Limits

  (1) No owner or operator shall apply coatings with a VOC content in excess of the amounts specified in Table 1, unless the owner or operator uses an add-on control device as specified in R307-343-6.

Table 1

WOOD MANUFACTURING COATING LIMITS

(values in pounds VOC per pound of solids, minus water and

exempt solvents (compounds not classified as VOC as defined in

R307-101-2), as applied)

Coating Category VOC Content Limit (lb/lb)

Topcoat 0.4

Single component, non-catalyzed sealer 0.9

Single component, non-catalyzed topcoat 0.9

Acid -- cured single and 2 component sealer 1.2

Acid -- cured single and 2 component topcoat 1.0

2 component polyurethane topcoat 1.0

2 component polyurethane sealer 1.0

Cobalt peroxide cured polyester sealer/topcoat 1.0

Formaldehyde free acid catalyzed sealer/topcoat 1.0

Strippable spray booth coatings 0.8

  (2) The limits in Table 1 do not apply to canned aerosol coating products used exclusively for touch-up or repair.