R714-160-21. Vintage Vehicles, Custom Vehicles, and Replica Vehicles

  (1) The following are minimum safety equipment requirements for a custom vehicle:

  (a) hydraulic service brakes on all wheels with current vehicle brake and stopping standards;

  (b) parking brake operating on at least two wheels on the same axle;

  (c) seat belts for all passengers and driver;

  (d) sealed beam or halogen headlamps;

  (e) brake Lamps;

  (f) turn signal lamps and switch;

  (g) AS-1 safety glass or Lexan; and

  (h) electric or vacuum windshield wiper in front of the drivers view.

  (2) The inspector shall issue a rejection inspection certificate when any of the above requirements are not met.

  (3) Exhaust systems may discharge along the side of the vehicle provided they discharge at a point behind the rear edge of the door and exhaust is directed away from the vehicle.

  (4) The vehicle identification for a custom vehicle shall be a number stamped on the frame of the vehicle.

  (a) If no such numbers exist, then the requirements as established pursuant to Rule R873-22M-15 must be followed in order to pass inspection.

  (5) All safety equipment of a replica vehicle shall comply with the requirements in Subsection 41-6a-1507(3).