R315-264-314. Special Requirements for Bulk and Containerized Liquids

  (a) The placement of bulk or non-containerized liquid hazardous waste or hazardous waste containing free liquids, whether or not sorbents have been added, in any landfill is prohibited.

  (b) To demonstrate the absence or presence of free liquids in either a containerized or a bulk waste, the following test shall be used: Method 9095B, Paint Filter Liquids Test, as described in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods," EPA Publication SW-846, as incorporated by reference in Section R315-260-11.

  (c) Containers holding free liquids shall not be placed in a landfill unless:

  (1) All free-standing liquid:

  (i) Has been removed by decanting, or other methods;

  (ii) Has been mixed with sorbent or solidified so that free-standing liquid is no longer observed; or

  (iii) Has been otherwise eliminated; or

  (2) The container is very small, such as an ampule; or

  (3) The container is designed to hold free liquids for use other than storage, such as a battery or capacitor; or

  (4) The container is a lab pack as defined in Section R316-264-316 and is disposed of in accordance with Section R316-264-316.

  (d) Sorbents used to treat free liquids to be disposed of in landfills shall be nonbiodegradable. Nonbiodegradable sorbents are: materials listed or described in Subsection R315-264-314(d)(1); materials that pass one of the tests in Subsection R315-264-314(d)(2); or materials that are determined by the Director to be nonbiodegradable through the Rule R315-260 petition process.

  (1) Nonbiodegradable sorbents.

  (i) Inorganic minerals, other inorganic materials, and elemental carbon, e.g., aluminosilicates, clays, smectites, Fuller's earth, bentonite, calcium bentonite, montmorillonite, calcined montmorillonite, kaolinite, micas - illite, vermiculites, zeolites; calcium carbonate (organic free limestone; oxides/hydroxides, alumina, lime, silica - sand, diatomaceous earth; perlite - volcanic glass; expanded volcanic rock; volcanic ash; cement kiln dust; fly ash; rice hull ash; activated charcoal/activated carbon; or

  (ii) High molecular weight synthetic polymers, e.g., polyethylene, high density polyethylene (HDPE), polypropylene, polystyrene, polyurethane, polyacrylate, polynorborene, polyisobutylene, ground synthetic rubber, cross-linked allylstyrene and tertiary butyl copolymers. This does not include polymers derived from biological material or polymers specifically designed to be degradable; or

  (iii) Mixtures of these nonbiodegradable materials.

  (2) Tests for nonbiodegradable sorbents.

  (i) The sorbent material is determined to be nonbiodegradable under ASTM Method G21-70 (1984a)-Standard Practice for Determining Resistance of Synthetic Polymer Materials to Fungi; or

  (ii) The sorbent material is determined to be nonbiodegradable under ASTM Method G22-76 (1984b)-Standard Practice for Determining Resistance of Plastics to Bacteria; or

  (iii) The sorbent material is determined to be non-biodegradable under OECD test 301B: CO2 Evolution - Modified Sturm Test.

  (e) The placement of any liquid which is not a hazardous waste in a landfill is prohibited unless the owner or operator of such landfill demonstrates to the Director, or the Director determines that:

  (1) The only reasonably available alternative to the placement in such landfill is placement in a landfill or unlined surface impoundment, whether or not permitted or operating under interim status, which contains, or may reasonably be anticipated to contain, hazardous waste; and

  (2) Placement in such owner or operator's landfill will not present a risk of contamination of any "underground source of drinking water," as that term is defined in Section R315-270-2.