No. 40298 (Amendment): Rule R156-15A. State Construction Code Administration and Adoption of Approved State Construction Code Rule  

  • (Amendment)

    DAR File No.: 40298
    Filed: 04/05/2016 09:58:25 AM

    RULE ANALYSIS

    Purpose of the rule or reason for the change:

    The purpose of this rule filing is to delete the International Existing Building Code (IEBC) from being named as an approved code and all amendments to the IEBC as an approved code. The IEBC was changed from an approved code to an adopted code as a result of H.B. 316 which was passed during the 2016 General Session.

    Summary of the rule or change:

    Proposed amendments affect Sections R156-15A-401, R156-15A-402, and R156-15A-403. The proposed amendments delete the IEBC from being named as an approved code and all amendments to the IEBC as an approved code. The IEBC was changed from an approved code to an adopted code as a result of H.B. 316 (2016).

    State statutory or constitutional authorization for this rule:

    Anticipated cost or savings to:

    the state budget:

    The Division will incur minimal costs of approximately $75 to print and distribute the rule once the proposed amendments are made effective. Any costs incurred will be absorbed in the Division's current budget.

    local governments:

    The proposed amendments do not affect local governments; therefore, there should be no cost impact to local governments.

    small businesses:

    The proposed amendments do not affect small businesses; therefore, there is no cost impact on small businesses.

    persons other than small businesses, businesses, or local governmental entities:

    The proposed amendments do not have costs beyond costs considered by the legislature and resulting from the passage of H.B. 316 (2016).

    Compliance costs for affected persons:

    The proposed amendments do not have compliance costs beyond costs considered by the legislature and resulting from the passage of H.B. 316 (2016).

    Comments by the department head on the fiscal impact the rule may have on businesses:

    This rule change deletes the IEBC as an approved code. The Code was changed from an approved code to an adopted code under H.B. 316 in the 2016 General Session. No fiscal impact to businesses is anticipated.

    Francine A. Giani, Executive Director

    The full text of this rule may be inspected, during regular business hours, at the Division of Administrative Rules, or at:

    Commerce
    Occupational and Professional Licensing
    HEBER M WELLS BLDG
    160 E 300 S
    SALT LAKE CITY, UT 84111-2316

    Direct questions regarding this rule to:

    Interested persons may present their views on this rule by submitting written comments to the address above no later than 5:00 p.m. on:

    05/31/2016

    Interested persons may attend a public hearing regarding this rule:

    • 05/11/2016 10:00 AM, Heber Wells Bldg, 160 E 300 S, Conference Room 464, Salt Lake City, UT

    This rule may become effective on:

    06/07/2016

    Authorized by:

    Mark Steinagel, Director

    RULE TEXT

    R156. Commerce, Occupational and Professional Licensing.

    R156-15A. State Construction Code Administration and Adoption of Approved State Construction Code Rule.

    R156-15A-401. Adoption - Approved Codes.

    Approved Codes. In accordance with Subsection 15A-1-204(6)(a), and subject to the limitations contained in Subsection 15A-1-204(6)(b), the following codes or standards are hereby incorporated by reference and approved for use and adoption by a compliance agency as the construction standards which may be applied to existing buildings in the regulation of building alteration, remodeling, repair, removal, seismic evaluation, and rehabilitation in the state:

    (1) the 1997 edition of the Uniform Code for the Abatement of Dangerous Buildings (UCADB) promulgated by the International Code Council;

    (2) [the 2012 edition of the International Existing Building Code (IEBC), including its appendix chapters, promulgated by the International Code Council;

    (3) ]ASCE 31-03, Seismic Evaluation of Existing Buildings, promulgated by the American Society of Civil Engineers;

    ([4]3) ASCE/SEI 41-06, the Seismic Rehabilitation of Existing Buildings, promulgated by the American Society of Civil Engineers, 2007 edition.[

     

    R156-15A-402. Statewide Amendments to the IEBC.

    The following are adopted as amendments to the IEBC to be applicable statewide:

    (1) In Section 202 the definition for existing buildings is deleted and replaced with the following:

    EXISTING BUILDING. A building lawfully erected under a prior adopted code, or one which is deemed a legal non-conforming building by the code official, and one which is not a dangerous building.

    (2) In Section 301.1 the exception is deleted.

    (3) In Section 705.1, Exception number 3, the following is added at the end:

    "This exception does not apply if the existing facility is undergoing a change of occupancy classification."

    (4) Section 706.2.1 is deleted and replaced with the following:

    706.2.1 Parapet bracing, wall anchors, and other appendages. Buildings constructed prior to 1975 shall have parapet bracing, wall anchors, and appendages such as cornices, spires, towers, tanks, signs, statuary, etc. evaluated by a licensed engineer when said building is undergoing reroofing, or alteration of or repair to said feature. Such parapet bracing, wall anchors, and appendages shall be evaluated in accordance with the reduced International Building Code level seismic forces as specified in IEBC Section 301.1.4.2 and design procedures of Section 301.1.4. When found to be deficient because of design or deteriorated condition, the engineer's recommendations to anchor, brace, reinforce, or remove the deficient feature shall be implemented.

    EXCEPTIONS:

    1. Group R-3 and U occupancies.

    2. Unreinforced masonry parapets need not be braced according to the above stated provisions provided that the maximum height of an unreinforced masonry parapet above the level of the diaphragm tension anchors or above the parapet braces shall not exceed one and one-half times the thickness of the parapet wall. The parapet height may be a maximum of two and one-half times its thickness in other than Seismic Design Categories D, E, or F.

    (5) Section 1007.3.1 is deleted and replaced with the following:

    1007.3.1 Compliance with the International Building Code Level Seismic Forces. When a building or portion thereof is subject to a change of occupancy such that a change in the nature of the occupancy results in a higher risk category based on Table 1604.5 of the International Building Code; or where such change of occupancy results in a reclassification of a building to a higher hazard category as shown in Table 1012.4; or where a change of a Group M occupancy to a Group A, E, F, I-1, R-1, R-2, or R-4 occupancy with two-thirds or more of the floors involved in Level 3 alteration work; or when such change of occupancy results in a design occupant load increase of 100% or more, the building shall conform to the seismic requirements of the International Building Code for the new risk category.

    Exceptions 1-4 remain unchanged.

    5. Where the design occupant load increase is less than 25 occupants and the occupancy category does not change.

    (6) In Section 1012.7.3 exception 2 is deleted.

    (7) In Section 1012.8.2 number 7 is added as follows:

    7. When a change of occupancy in a building or portion of a building results in a Group R-2 occupancy, not less than 20 percent of the dwelling or sleeping units shall be Type B dwelling or sleeping units. These dwelling or sleeping units may be located on any floor of the building provided with an accessible route. Two percent, but not less than one unit, of the dwelling or sleeping units shall be Type A dwelling units.

     

    R156-15A-403. Local Amendment to the IEBC.

    The following are adopted as amendments to the IEBC to be applicable to the following jurisdictions:

    None.]

     

    KEY: contractors, building codes, building inspections, licensing

    Date of Enactment or Last Substantive Amendment: [October 23, 2014]2016

    Authorizing, and Implemented or Interpreted Law: 58-1-106(1)(a); 58-1-202(1)(a); 15A-1-204(6); 15A-1-205

     


Document Information

Hearing Meeting:
05/11/2016 10:00 AM, Heber Wells Bldg, 160 E 300 S, Conference Room 464, Salt Lake City, UT
Effective Date:
6/7/2016
Publication Date:
05/01/2016
Type:
Notices of Proposed Rules
Filed Date:
04/05/2016
Agencies:
Commerce, Occupational and Professional Licensing
Rulemaking Authority:

Subsection 58-1-202(1)(a)

Subsection 58-1-106(1)(a)

Section 15A-1-205

Subsection 15A-1-204(6)

Authorized By:
Mark Steinagel, Director
DAR File No.:
40298
Summary:

Proposed amendments affect Sections R156-15A-401, R156-15A-402, and R156-15A-403. The proposed amendments delete the IEBC from being named as an approved code and all amendments to the IEBC as an approved code. The IEBC was changed from an approved code to an adopted code as a result of H.B. 316 (2016).

CodeNo:
R156-15A
CodeName:
{33843|R156-15A|R156-15A. State Construction Code Administration and Adoption of Approved State Construction Code Rule}
Link Address:
CommerceOccupational and Professional LicensingHEBER M WELLS BLDG160 E 300 SSALT LAKE CITY, UT 84111-2316
Link Way:

Dan Jones, by phone at 801-530-6720, by FAX at 801-530-6511, or by Internet E-mail at dansjones@utah.gov

AdditionalInfo:
More information about a Notice of Proposed Rule is available online. The Portable Document Format (PDF) version of the Bulletin is the official version. The PDF version of this issue is available at http://www.rules.utah.gov/publicat/bull-pdf/2016/b20160501.pdf. The HTML edition of the Bulletin is a convenience copy. Any discrepancy between the PDF version and HTML version is resolved in favor of the PDF version. Text to be deleted is struck through and surrounded by brackets ([example]). ...
Related Chapter/Rule NO.: (1)
R156-15A. State Construction Code Administration and Adoption of Approved State Construction Code Rule.