No. 27293 (Amendment): R307-214-2. Part 63 Sources

DAR File No.: 27293
Filed: 07/13/2004, 04:32
Received by: NL

 

RULE ANALYSIS

Purpose of the rule or reason for the change:

The purpose of this change is to protect the public health and the environment by reducing emissions of Hazardous Air Pollutants.

 

Summary of the rule or change:

Fifteen new federal standards for hazardous air pollutants (HAPs) are proposed for incorporation by reference into Section R307-214-2. There are sources in Utah that are known to be subject to ten of these new standards. The Clean Air Act of 1990 required the EPA to issue standards for HAPs; these standards are commonly called Maximum Achievable Control Technologies (MACTs). State operation of the MACTs program is a federally required component of Operating Permits program under Title V of the Clean Air Act.

 

State statutory or constitutional authorization for this rule:

Subsection 19-2-104(1)(a)

 

This rule or change incorporates by reference the following material:

40 CFR Part 63, Subpart EEEE, National Emission Standards for Hazardous Air Pollutions: Organic Liquids Distribution (Non-Gasoline); 40 CFR Part 63, Subpart FFFF, National Emission Standards for Hazardous Air Pollutions: Organic Chemical Manufacturing; 40 CFR Part 63, Subpart MMMM, National Emission Standards for Hazardous Air Pollutions: Surface Coating of Miscellaneous Metal Parts and Products; 40 CFR Part 63, Subpart YYYY, National Emission Standards for Hazardous Air Pollutions for Stationary Combustion Turbines; 40 CFR Part 63, Subpart ZZZZ, National Emission Standards for Hazardous Air Pollutions for Stationary Reciprocating Internal Combustion Engines; 40 CFR Part 63, Subpart AAAAA, National Emission Standards for Hazardous Air Pollutions for Lime Manufacturing Plants; 40 CFR Part 63, Subpart EEEEE, National Emission Standards for Hazardous Air Pollutions for Iron and Steel Foundries; 40 CFR Part 63, Subpart GGGGG, National Emission Standards for Hazardous Air Pollutions: Site Remediation; 40 CFR Part 63, Subpart HHHHH, National Emission Standards for Hazardous Air Pollutions: Miscellaneous Coating Manufacturing; and 40 CFR Part 63, Subpart TTTTT, National Emission Standards for Hazardous Air Pollutions for Primary Magnesium Refining

 

Anticipated cost or savings to:

the state budget:

There are no costs to the state budget for implementing the MACTS, as all sources are required to hold Operating Permits, and their costs are built into the fees paid by sources of HAPs under the Operating Permit Program.

 

local governments:

The only new MACTs that may affect local governments. The first is 40 CFR Part 63, Subpart YYYY, National Emission Standards for Hazardous Air Pollutants for Stationary Combustion Turbines. Nationally, implementation of the rule will reduce HAPs from these sources by approximately 90%, with minimal changes in prices and output for products made by the affected industries. Second is 40 CFR Part 63, Subpart ZZZZ NESHAPs for Stationary Reciprocating Internal Combustion Engines. Nationwide, this rule will reduce HAP emissions by 5,600 ton per year and NOx emissions by 90%. Minimal change to prices and quantity produced in most of the fuel markets. Although the natural gas market has the greatest share of the regulatory burden, the impact on prices and output is about 0.3%, which is considered a minimal economy impact for this industry. Cost to producers is 0.12%. For consumers, as a percentage of spending on the outputs from these industries is 0.003%.

 

other persons:

1) 40 CFR Part 63, Subpart EEEE, National Emission Standards for Hazardous Air Pollutions: Organic Liquids Distribution (Non-Gasoline). There are one to three sources in Utah known to be subject to this rule. Nationwide, this rule is anticipated to result in a 60% decrease in emissions of hazardous air pollutants (HAPs) from these sources. The cost increase may be as much as $7,100 per ton of HAPs reduced, with prices for the finished product increasing by approximately 0.1%, on average across the U.S. No adverse economic impact is expected to occur because of this rule. 2) 40 CFR Part 63, Subpart FFFF, National Emission Standards for Hazardous Air Pollutions: Organic Chemical Manufacturing. There are approximately five to eight sources in Utah known to be subject to this rule. Across the U.S., emissions will be reduced by approximately 70% and the price of products from this industry will rise 0.5%. Nationwide the capital cost for the existing sources estimated to be $127,000,000 per year and annual cost for existing sources is estimated to be $75,100,000 per year. No adverse economic impact is expected to occur because of this rule. 3) 40 CFR Part 63, Subpart MMMM, National Emission Standards for Hazardous Air Pollutions: Surface Coating of Miscellaneous Metal Parts and Products. There are two sources in Utah known to be subject to this rule. Nationally, implementation of the rule will reduce HAPs from these sources by approximately 48%. There may be minimal cost increases, and a small price increase to consumers of such products. 4) 40 CFR Part 63, Subpart YYYY, National Emission Standards for Hazardous Air Pollutions for Stationary Combustion Turbines. There are six to ten sources in Utah known to be subject to this rule. Nationally, implementation of the rule will reduce HAPs from these sources by approximately 90%, with minimal changes in prices and output for products made by the affected industries. 5) 40 CFR Part 63, Subpart ZZZZ, National Emission Standards for Hazardous Air Pollutions for Stationary Reciprocating Internal Combustion Engines. There are as many as 20 sources in Utah known to be subject to this rule. Nationwide, this rule will reduce HAP emissions by 5,600 ton per year and NOx emissions by 90%. Minimal change to prices and quantity produced in most of the fuel markets. Although the natural gas market has the greatest share of the regulatory burden, the impact on prices and output is about 0.3%, which is considered a minimal economy impact for this industry. Cost to producers is 0.12%. For consumers, as a percentage of spending on the outputs from these industries is 0.003%. 6) 40 CFR Part 63, Subpart AAAAA, National Emission Standards for Hazardous Air Pollutions for Lime Manufacturing Plants. There are two sources in Utah known to be subject to this rule. Nationally, implementation of the rule will reduce HAPs from these sources by approximately 2% and total emissions by 17%. Average price per ton of lime will increase by 2.1%(or $1.17 per metric ton). Production is projected to decrease by 1.8%. It is projected that consumers of lime across the U.S. will lose $19,700,000 annually. 7) 40 CFR Part 63, Subpart EEEEE, National Emission Standards for Hazardous Air Pollutions for Iron and Steel Foundries. There is one source in Utah that is subject to this rule. Nationally, implementation of the rule will reduce HAPs by 820 tons per year and reduce mercury emissions by 80% (or 1.4 tons per year). Nationwide the total capital cost is about $188,000,000 and annually cost to maintain equipment is estimated at $21,000,000. Prices for iron and steel casting are expected to increase by 0.1% with domestic production declining by 8,400 tons per year. It is expected that consumers will incur $13,200,000 in higher prices and foregone consumption. Further, domestic producers of iron and steel casting are expected to experience profit losses of $9,000,000, while foreign producers may experience profit gains of approximately $1,000,000. 8) 40 CFR Part 63, Subpart GGGGG, National Emission Standards for Hazardous Air Pollutions: Site Remediation. There is one source in Utah that is subject to this rule. Nationwide, this rule is anticipated to reduce air emissions by approximately 50% from these sources. Nationally total capital cost will be $18,000,000 and annual cost of $9,000,000 per year to implement this rule. It is expected that cost-to-sales ratio is below 0.02% for the affected industries to comply with this rule. 9) 40 CFR Part 63, Subpart HHHHH, National Emission Standards for Hazardous Air Pollutions: Miscellaneous Coating Manufacturing. There are one to two sources in Utah known to be subject to this rule. Nationally, this rule is anticipated to reduce HAPs from these sources by approximately 64%. The cost impacts expected include capital costs (nationally $57,000,000) to install control devices and monitoring equipment and annual costs (nationally $16,000,000) in maintaining equipment and conducting performance tests. Further, it is estimated that it will cost approximately $3,500 per respondent for recordkeeping and reporting requirements. Prices will increase for affected output by 0.3%. Production will decrease by 0.1% because of the rule. One plant closure is expected out of the 127 facilities nationwide. However, the plant that is expected to close already has low profitability. Therefore, no adverse impact is expected to occur. 10) 40 CFR Part 63, Subpart TTTTT, National Emission Standards for Hazardous Air Pollutions for Primary Magnesium Refining. There is one source in Utah (only operating magnesium plant in the nation) known to be subject to this rule. Generally, there are no significant impacts expected because the magnesium operation already has all of the required air pollution control equipment in place and operating. The only impacts will be the estimated cost of $43,000 for the additional monitoring requirements required by the rule. 11) There are no known sources in Utah that are subject to the other federal requirements being incorporated by reference, and thus there is no cost or savings information.

 

Compliance costs for affected persons:

1) 40 CFR Part 63, Subpart EEEE, National Emission Standards for Hazardous Air Pollutions: Organic Liquids Distribution (Non-Gasoline). There are one to three sources in Utah known to be subject to this rule. Nationwide, this rule is anticipated to result in a 60% decrease in emissions of hazardous air pollutants (HAPs) from these sources. The cost increase may be as much as $7,100 per ton of HAPs reduced, with prices for the finished product increasing by approximately 0.1%, on average across the U.S. No adverse economic impact is expected to occur because of this rule. 2) 40 CFR Part 63, Subpart FFFF, National Emission Standards for Hazardous Air Pollutions: Organic Chemical Manufacturing. There are approximately five to eight sources in Utah known to be subject to this rule. Across the U.S., emissions will be reduced by approximately 70% and the price of products from this industry will rise 0.5%. Nationwide the capital cost for the existing sources estimated to be $127,000,000 per year and annual cost for existing sources is estimated to be $75,100,000 per year. No adverse economic impact is expected to occur because of this rule. 3) 40 CFR Part 63, Subpart MMMM, National Emission Standards for Hazardous Air Pollutions: Surface Coating of Miscellaneous Metal Parts and Products. There are two sources in Utah known to be subject to this rule. Nationally, implementation of the rule will reduce HAPs from these sources by approximately 48%. There may be minimal cost increases, and a small price increase to consumers of such products. 4) 40 CFR Part 63, Subpart YYYY, National Emission Standards for Hazardous Air Pollutions for Stationary Combustion Turbines. There are six to ten sources in Utah known to be subject to this rule. Nationally, implementation of the rule will reduce HAPs from these sources by approximately 90%, with minimal changes in prices and output for products made by the affected industries. 5) 40 CFR Part 63, Subpart ZZZZ, National Emission Standards for Hazardous Air Pollutions for Stationary Reciprocating Internal Combustion Engines. There are as many as 20 sources in Utah known to be subject to this rule. Nationwide, this rule will reduce HAP emissions by 5,600 ton per year and NOx emissions by 90%. Minimal change to prices and quantity produced in most of the fuel markets. Although the natural gas market has the greatest share of the regulatory burden, the impact on prices and output is about 0.3%, which is considered a minimal economy impact for this industry. Cost to producers is 0.12%. For consumers, as a percentage of spending on the outputs from these industries is 0.003%. 6) 40 CFR Part 63, Subpart AAAAA, National Emission Standards for Hazardous Air Pollutions for Lime Manufacturing Plants. There are two sources in Utah known to be subject to this rule. Nationally, implementation of the rule will reduce HAPs from these sources by approximately 2% and total emissions by 17%. Average price per ton of lime will increase by 2.1%(or $1.17 per metric ton). Production is projected to decrease by 1.8%. It is projected that consumers of lime across the U.S. will lose $19,700,000 annually. 7) 40 CFR Part 63, Subpart EEEEE, National Emission Standards for Hazardous Air Pollutions for Iron and Steel Foundries. There is one source in Utah that is subject to this rule. Nationally, implementation of the rule will reduce HAPs by 820 tons per year and reduce mercury emissions by 80% (or 1.4 tons per year). Nationwide the total capital cost is about $188,000,000 and annually cost to maintain equipment is estimated at $21,000,000. Prices for iron and steel casting are expected to increase by 0.1% with domestic production declining by 8,400 tons per year. It is expected that consumers will incur $13,200,000 in higher prices and foregone consumption. Further, domestic producers of iron and steel casting are expected to experience profit losses of $9,000,000, while foreign producers may experience profit gains of approximately $1,000,000. 8) 40 CFR Part 63, Subpart GGGGG, National Emission Standards for Hazardous Air Pollutions: Site Remediation. There is one source in Utah that is subject to this rule. Nationwide, this rule is anticipated to reduce air emissions by approximately 50% from these sources. Nationally total capital cost will be $18,000,000 and annual cost of $9,000,000 per year to implement this rule. It is expected that cost-to-sales ratio is below 0.02% for the affected industries to comply with this rule. 9) 40 CFR Part 63, Subpart HHHHH, National Emission Standards for Hazardous Air Pollutions: Miscellaneous Coating Manufacturing. There are one to two sources in Utah known to be subject to this rule. Nationally, this rule is anticipated to reduce HAPs from these sources by approximately 64%. The cost impacts expected include capital costs (nationally $57,000,000) to install control devices and monitoring equipment and annual costs (nationally $16,000,000) in maintaining equipment and conducting performance tests. Further, it is estimated that it will cost approximately $3,500 per respondent for recordkeeping and reporting requirements. Prices will increase for affected output by 0.3%. Production will decrease by 0.1% because of the rule. One plant closure is expected out of the 127 facilities nationwide. However, the plant that is expected to close already has low profitability. Therefore, no adverse impact is expected to occur. 10) 40 CFR Part 63, Subpart TTTTT, National Emission Standards for Hazardous Air Pollutions for Primary Magnesium Refining. There is one source in Utah (only operating magnesium plant in the nation) known to be subject to this rule. Generally, there are no significant impacts expected because the magnesium operation already has all of the required air pollution control equipment in place and operating. The only impacts will be the estimated cost of $43,000 for the additional monitoring requirements required by the rule. 11) There are no known sources in Utah that are subject to the other federal requirements being incorporated by reference, and thus there is no cost or benefit information.

 

Comments by the department head on the fiscal impact the rule may have on businesses:

Costs for Utah businesses to implement these requirements are very small, and will not affect the viability of any Utah business.

 

The full text of this rule may be inspected, during regular business hours, at the Division of Administrative Rules, or at:

Environmental Quality
Air Quality
150 N 1950 W
SALT LAKE CITY UT 84116-3085

 

Direct questions regarding this rule to:

Mat E. Carlile at the above address, by phone at 801-536-4136, by FAX at 801-536-0085, or by Internet E-mail at [e-mail]

 

Interested persons may present their views on this rule by submitting written comments to the address above no later than 5:00 p.m. on:

08/31/2004

 

Interested persons may attend a public hearing regarding this rule:

8/19/2004 at 1:30 PM, DAQ Building, 150 N 1950 W, Main Conference Room, Salt Lake City, UT

 

This rule may become effective on:

10/07/2004

 

Authorized by:

M. Cheryl Heying, Planning Branch Manager

 

 

RULE TEXT

R307. Environmental Quality, Air Quality.

R307-214. National Emission Standards for Hazardous Air Pollutants.

R307-214-2. Part 63 Sources.

The provisions listed below of 40 CFR Part 63, National Emission Standards for Hazardous Air Pollutants for Source Categories, effective as of July 1, [2002]2003, or later for those whose subsequent publication citation is included below, are incorporated into these rules by reference. References in 40 CFR Part 63 to "the Administrator" shall refer to the executive secretary, unless by federal law the authority is specific to the Administrator and cannot be delegated.

(1) 40 CFR Part 63, Subpart A, General Provisions.

(2) 40 CFR Part 63, Subpart B, Requirements for Control Technology Determinations for Major Sources in Accordance with 42 U.S.C. 7412(g) and (j).

(3) 40 CFR Part 63, Subpart F, National Emission Standards for Organic Hazardous Air Pollutants from the Synthetic Organic Chemical Manufacturing Industry.

(4) 40 CFR Part 63, Subpart G, National Emission Standards for Organic Hazardous Air Pollutants from the Synthetic Organic Chemical Manufacturing Industry for Process Vents, Storage Vessels, Transfer Operations, and Wastewater.

(5) 40 CFR Part 63, Subpart H, National Emission Standards for Organic Hazardous Air Pollutants for Equipment Leaks.

(6) 40 CFR Part 63, Subpart I, National Emission Standards for Organic Hazardous Air Pollutants for Certain Processes Subject to the Negotiated Regulation for Equipment Leaks.

(7) 40 CFR Part 63, Subpart J, National Emission Standards for Polyvinyl Chloride and Copolymers Production[, published on July 10, 2002 at 67 FR 45885].

(8) 40 CFR Part 63, Subpart L, National Emission Standards for Coke Oven Batteries.

(9) 40 CFR Part 63, Subpart M, National Perchloroethylene Air Emission Standards for Dry Cleaning Facilities.

(10) 40 CFR Part 63, Subpart N, National Emission Standards for Chromium Emissions From Hard and Decorative Chromium Electroplating and Chromium Anodizing Tanks.

(11) 40 CFR Part 63, Subpart O, National Emission Standards for Hazardous Air Pollutants for Ethylene Oxide Commercial Sterilization and Fumigation Operations.

(12) 40 CFR Part 63, Subpart Q, National Emission Standards for Hazardous Air Pollutants for Industrial Process Cooling Towers.

(13) 40 CFR Part 63, Subpart R, National Emission Standards for Gasoline Distribution Facilities (Bulk Gasoline Terminals and Pipeline Breakout Stations).

(14) 40 CFR Part 63, Subpart T, National Emission Standards for Halogenated Solvent Cleaning.

(15) 40 CFR Part 63, Subpart U, National Emission Standards for Hazardous Air Pollutant Emissions: Group I Polymers and Resins.

(16) 40 CFR Part 63, Subpart AA, National Emission Standards for Hazardous Air Pollutants for Phosphoric Acid Manufacturing.

(17) 40 CFR Part 63, Subpart BB, National Emission Standards for Hazardous Air Pollutants for Phosphate Fertilizer Production.

(18) 40 CFR Part 63, Subpart CC, National Emission Standards for Hazardous Air Pollutants from Petroleum Refineries.

(19) 40 CFR Part 63, Subpart DD, National Emission Standards for Hazardous Air Pollutants from Off-Site Waste and Recovery Operations.

(20) 40 CFR Part 63, Subpart EE, National Emission Standards for Magnetic Tape Manufacturing Operations.

(21) 40 CFR Part 63, Subpart GG, National Emission Standards for Aerospace Manufacturing and Rework Facilities.

(22) 40 CFR Part 63, Subpart HH, National Emission Standards for Hazardous Air Pollutants for Oil and Natural Gas Production.

(23) 40 CFR Part 63, Subpart JJ, National Emission Standards for Wood Furniture Manufacturing Operations.

(24) 40 CFR Part 63, Subpart KK, National Emission Standards for the Printing and Publishing Industry.

(25) 40 CFR Part 63, Subpart MM, National Emission Standards for Hazardous Air Pollutants for Chemical Recovery Combustion Sources at Kraft, Soda, Sulfite, and Stand-Alone Semichemical Pulp Mills.

(26) 40 CFR Part 63, Subpart OO, National Emission Standards for Tanks - Level 1.

(27) 40 CFR Part 63, Subpart PP, National Emission Standards for Containers.

(28) 40 CFR Part 63, Subpart QQ, National Emission Standards for Surface Impoundments.

(29) 40 CFR Part 63, Subpart RR, National Emission Standards for Individual Drain Systems.

(30) 40 CFR Part 63, Subpart SS, National Emission Standards for Closed Vent Systems, Control Devices, Recovery Devices and Routing to a Fuel Gas System or a Process (Generic MACT).

(31) 40 CFR Part 63, Subpart TT, National Emission Standards for Equipment Leaks- Control Level 1 (Generic MACT).

(32) 40 CFR Part 63, Subpart UU, National Emission Standards for Equipment Leaks-Control Level 2 Standards (Generic MACT).

(33) 40 CFR Part 63, Subpart VV, National Emission Standards for Oil-Water Separators and Organic-Water Separators.

(34) 40 CFR Part 63, Subpart WW, National Emission Standards for Storage Vessels (Tanks)-Control Level 2 (Generic MACT).

(35) 40 CFR Part 63, Subpart XX, National Emission Standards for Ethylene Manufacturing Process Units: Heat Exchange Systems and Waste Operations[, published on July 12, 2002, at 67 FR 46257].

(36) 40 CFR Part 63, Subpart YY, National Emission Standards for Hazardous Air Pollutants for Source Categories: Generic MACT.

(37) 40 CFR Part 63, Subpart CCC, National Emission Standards for Hazardous Air Pollutants for Steel Pickling-HCl Process Facilities and Hydrochloric Acid Regeneration Plants.

(38) 40 CFR Part 63, Subpart DDD, National Emission Standards for Hazardous Air Pollutants for Mineral Wool Production.

(39) 40 CFR Part 63, Subpart EEE, National Emission Standards for Hazardous Air Pollutants from Hazardous Waste Combustors.

(40) 40 CFR Part 63, Subpart GGG, National Emission Standards for Hazardous Air Pollutants for Pharmaceuticals Production.

(41) 40 CFR Part 63, Subpart HHH, National Emission Standards for Hazardous Air Pollutants for Natural Gas Transmission and Storage.

(42) 40 CFR Part 63, Subpart III, National Emission Standards for Hazardous Air Pollutants for Flexible Polyurethane Foam Production.

(43) 40 CFR Part 63, Subpart JJJ, National Emission Standards for Hazardous Air Pollutants for Group IV Polymers and Resins.

(44) 40 CFR Part 63, Subpart LLL, National Emission Standards for Hazardous Air Pollutants for Portland Cement Manufacturing Industry.

(45) 40 CFR Part 63, Subpart MMM, National Emission Standards for Hazardous Air Pollutants for Pesticide Active Ingredient Production.

(46) 40 CFR Part 63, Subpart NNN, National Emission Standards for Hazardous Air Pollutants for Wool Fiberglass Manufacturing.

(47) 40 CFR Part 63, Subpart OOO, National Emission Standards for Hazardous Air Pollutants for Amino/Phenolic Resins Production (Resin III).

(48) 40 CFR Part 63, Subpart PPP, National Emission Standards for Hazardous Air Pollutants for Polyether Polyols Production.

(49) 40 CFR Part 63, Subpart QQQ, National Emission Standards for Hazardous Air Pollutants for Primary Copper Smelters.

(50) 40 CFR Part 63, Subpart RRR, National Emission Standards for Hazardous Air Pollutants for Secondary Aluminum Production.

(51) 40 CFR Part 63, Subpart TTT, National Emission Standards for Hazardous Air Pollutants for Primary Lead Smelting.

(52) 40 CFR Part 63, Subpart UUU, National Emission Standards for Hazardous Air Pollutants for Petroleum Refineries: Catalytic Cracking Units, Catalytic Reforming Units, and Sulfur Recovery Units.

(53) 40 CFR Part 63, Subpart VVV, National Emission Standards for Hazardous Air Pollutants: Publicly Owned Treatment Works.

(54) 40 CFR Part 63, Subpart AAAA, National Emission Standards for Hazardous Air Pollutants for Municipal Solid Waste Landfills[, published on January 16, 2003 at 68 FR 2227].

(55) 40 CFR Part 63, Subpart CCCC, National Emission Standards for Manufacturing of Nutritional Yeast.

(56) 40 CFR Part 63, Subpart EEEE, National Emission Standards for Hazardous Air Pollutants for Organic Liquids Distribution (non-gasoline), published on February 3, 2004 at 69 FR 5038.

(57) 40 CFR Part 63, Subpart FFFF, National Emission Standards for Hazardous Air Pollutants for Miscellaneous Organic Chemical Manufacturing, published on November 10, 2003 at 68 FR 63852.

(5[6]8) 40 CFR Part 63, Subpart GGGG, National Emission Standards for Vegetable Oil Production; Solvent Extraction.

(5[7]9) 40 CFR Part 63, Subpart HHHH - National Emission Standards for Wet-Formed Fiberglass Mat Production.

(60) 40 CFR Part 63, Subpart IIII, National Emission Standards for Hazardous Air Pollutants for Surface Coating of Automobiles and Light-Duty Trucks, published on April 26, 2004 at 69 FR 22602.

([58]61) 40 CFR Part 63, Subpart JJJJ, National Emission Standards for Hazardous Air Pollutants for Paper and Other Web Surface Coating Operations[, published on December 4, 2002 at 67 FR 72330].

(62) 40 CFR Part 63, Subpart KKKK, National Emission Standards for Hazardous Air Pollutants for Surface Coating of Metal Cans, published on November 13, 2003 at 68 FR 64432.

(63) 40 CFR Part 63, Subpart MMMM, National Emission Standards for Hazardous Air Pollutants for Surface Coating of Miscellaneous Metal Parts and Products, published on January 2, 2004 at 69 FR 130.

([59]64) 40 CFR Part 63, Subpart NNNN - National Emission Standards for Large Appliances Surface Coating Operations[, published on July 23, 2002, at 67 FR 48253].

([60]65) 40 CFR Part 63, Subpart OOOO, National Emission Standards for Hazardous Air Pollutants for Fabric Printing, Coating and Dyeing Surface Coating Operations[, published on May 29, 2003 at 68 FR 32172].

(66) 40 CFR Part 63, Subpart PPPP, National Emissions Standards for Hazardous Air Pollutants for Surface Coating of Plastic Parts and Products, published on April 19, 2004 at 69 FR 20968.

(6[1]7) 40 CFR Part 63, Subpart QQQQ, National Emission Standards for Hazardous Air Pollutants for Surface Coating of Wood Building Products[, published on May 28, 2003 at 68 FR 31746].

(6[2]8) 40 CFR Part 63, Subpart RRRR, National Emission Standards for Hazardous Air Pollutants for Metal Furniture Surface Coating Operations[, published on May 23, 2003 at 68 FR 28606].

(6[3]9) 40 CFR Part 63, Subpart SSSS - National Emission Standards for Metal Coil Surface Coating Operations.

([64]70) 40 CFR Part 63, Subpart TTTT - National Emission Standards for Leather Tanning and Finishing Operations.

([65]71) 40 CFR Part 63, Subpart UUUU - National Emission Standards for Cellulose Product Manufacturing.

([66]72) 40 CFR Part 63, Subpart VVVV - National Emission Standards for Boat Manufacturing.

([67]73) 40 CFR Part 63, Subpart WWWW, National Emissions Standards for Hazardous Air Pollutants for Reinforced Plastic Composites Production[, published on April 21, 2003 at 68 FR 19375].

([68]74) 40 CFR Part 63, Subpart XXXX - National Emission Standards for Tire Manufacturing[, published on July 9, 2002, at 67 FR 45589].

(75) 40 CFR Part 63, Subpart YYYY, National Emission Standards for Hazardous Air Pollutants for Stationary Combustion Turbines, published on March 5, 2004 at 69 FR 10512.

(76) 40 CFR Part 63, Subpart ZZZZ, National Emission Standards for Hazardous Air Pollutants for Stationary Reciprocating Internal Combustion Engines, published on June 15, 2004 at 69 FR 33474.

(77) 40 CFR Part 63, Subpart AAAAA, National Emission Standards for Hazardous Air Pollutants for Lime Manufacturing Plants, published on January 5, 2004 at 69 FR 394.

([69]78) 40 CFR Part 63, Subpart BBBBB, National Emission Standards for Hazardous Air Pollutants for Semiconductor Manufacturing[, published on May 22, 2003 at 68 FR 27913].

([70]79) 40 CFR Part 63, Subpart CCCCC, National Emission Standards for Hazardous Air Pollutants for Coke Ovens: Pushing, Quenching, and Battery Stacks[, published on April 14, 2003 at 68 FR 18008].

(80) 40 CFR Part 63, Subpart EEEEE, National Emission Standards for Hazardous Air Pollutants for Iron and Steel Foundries, published on April 22, 2004 at 69 FR 21906.

([71]81) 40 CFR Part 63, Subpart FFFFF, National Emission Standards for Hazardous Air Pollutants for Integrated Iron and Steel Manufacturing[, published on May 20, 2003 at 68 FR 27646].

(82) 40 CFR Part 63, Subpart GGGGG, National Emission Standards for Hazardous Air Pollutants for Site Remediation, published on October 8, 2003 at 68 FR 58172.

(83) 40 CFR Part 63, Subpart HHHHH, National Emission Standards for Hazardous Air Pollutants for Miscellaneous Coating Manufacturing, published on December 11, 2003 at 68 FR 69164.

(84) 40 CFR Part 63, Subpart IIIII, National Emission Standards for Hazardous Air Pollutants for Mercury Emissions from Mercury Cell Chlor-Alkali Plants, published on December 19, 2003 at 68 FR 70904.

([72]85) 40 CFR Part 63, Subpart JJJJJ, National Emission Standards for Hazardous Air Pollutants for Brick and Structural Clay Products Manufacturing[, published on May 16, 2003 at 68 FR 26690].

([73]86) 40 CFR Part 63, Subpart KKKKK, National Emission Standards for Hazardous Air Pollutants for Clay Ceramics Manufacturing[, published on May 16, 2003 at 68 FR 26690].

([74]87) 40 CFR Part 63, Subpart LLLLL, National Emission Standards for Hazardous Air Pollutants for Asphalt Processing and Asphalt Roofing Manufacturing[, re-published on May 7, 2003 at 68 FR 24562].

([75]88) 40 CFR Part 63, Subpart MMMMM, National Emission Standards for Hazardous Air Pollutants for Flexible Polyurethane Foam Fabrication Operations[, published on April 14, 2003 at 68 FR 18062].

([76]89) 40 CFR Part 63, Subpart NNNNN, National Emission Standards for Hazardous Air Pollutants for Hydrochloric Acid Production[ published on April 17, 2003 at 68 FR 19076].

([77]90) 40 CFR Part 63, Subpart PPPPP, National Emission Standards for Hazardous Air Pollutants for Engine Test Cells/Stands[, published on May 27, 2003 at 68 FR 28774].

([78]91) 40 CFR Part 63, Subpart QQQQQ - National Emission Standards for Hazardous Air Pollutants for Friction Materials Manufacturing Facilities[, published on October 18, 2002, at 67 FR 64497].

(92) 40 CFR Part 63, Subpart RRRRR, National Emission Standards for Hazardous Air Pollutants for Taconite Iron Ore Processing, published on October 30, 2003 at 68 FR 61868.

([79]93) 40 CFR Part 63, Subpart SSSSS, National Emission Standards for Hazardous Air Pollutants for Refractory Products Manufacturing[, published on April 16, 2003 at 68 FR 18730].

(94) 40 CFR Part 63, Subpart TTTTT, National Emission Standards for Hazardous Air Pollutants for Primary Magnesium Refining, published on October 10, 2003 at 68 FR 58615.

 

KEY: air pollution, hazardous air pollutant, MACT

[October 1, 2003]2004

Notice of Continuation February 9, 2004

19-2-104(1)(a)