No. 41864 (Repeal): Rule R714-240. Standards and Specifications for Child Restraint Devices and Safety Belts  

  • (Repeal)

    DAR File No.: 41864
    Filed: 06/29/2017 12:14:40 PM

    RULE ANALYSIS

    Purpose of the rule or reason for the change:

    This rule is being repealed because the requirements regarding the use of safety belts and child restraint devices are included in Section 41-6a-1803, and adoption of standards set forth in 49 CFR 571.213 is included in Subsection 41-6a-1601(2)(c)(ii). Due to the fact that the information contained in the rule is now included in the Utah Code, the rule is no longer needed.

    Summary of the rule or change:

    This rule is being repealed because the requirements regarding the use of safety belts and child restraint devices are included in Section 41-6a-1803, and adoption of standards set forth in 49 CFR 571.213 is included in Subsection 41-6a-1601(2)(c)(ii). Due to the fact that the information contained in the rule is now included in the Utah Code, the rule is no longer needed. This rule is repealed in its entirety.

    Statutory or constitutional authorization for this rule:

    Anticipated cost or savings to:

    the state budget:

    There is not an anticipated cost or savings to the state budget because the rule is being repealed due to the fact that the provisions of the rule are now included in Section 41-6a-1803 and Subsection 41-6a-1601(2)(c)(ii). As a result, the rule is no longer needed.

    local governments:

    There is not an anticipated cost or savings to local government because the rule is being repealed due to the fact that the provisions of the rule are now included in Section 41-6a-1803 and Subsection 41-6a-1601(2)(c)(ii). As a result, the rule is no longer needed.

    small businesses:

    There is not an anticipated cost or savings to small businesses because the rule is being repealed due to the fact that the provisions of the rule are now included in Section 41-6a-1803 and Subsection 41-6a-1601(2)(c)(ii). As a result, the rule is no longer needed.

    persons other than small businesses, businesses, or local governmental entities:

    There is not an anticipated cost or savings to persons other than small businesses, businesses, or local government entities because the rule is being repealed due to the fact that the provisions of the rule are now included in Section 41-6a-1803 and Subsection 41-6a-1601(2)(c)(ii). As a result, the rule is no longer needed.

    Compliance costs for affected persons:

    There is not an anticipated compliance cost for affected persons because the rule is being repealed due to the fact that the provisions of the rule are now included in Section 41-6a-1803 and Subsection 41-6a-1601(2)(c)(ii). As a result, the rule is no longer needed.

    Comments by the department head on the fiscal impact the rule may have on businesses:

    After conducting a thorough analysis, it was determined that this proposed rule will not have a fiscal impact on businesses.

    Keith D. Squires, Commissioner

    The full text of this rule may be inspected, during regular business hours, at the Office of Administrative Rules, or at:

    Public Safety
    Highway Patrol
    CALVIN L RAMPTON COMPLEX
    4501 S 2700 W
    SALT LAKE CITY, UT 84119-5994

    Direct questions regarding this rule to:

    Interested persons may present their views on this rule by submitting written comments to the address above no later than 5:00 p.m. on:

    08/14/2017

    This rule may become effective on:

    08/21/2017

    Authorized by:

    Steven Winward, Captain

    RULE TEXT

    R714. Public Safety, Highway Patrol.

    [ R714-240. Standards and Specifications for Child Restraint Devices and Safety Belts.

    R714-240-1. Purpose.

    Subsection 41-6a-1803(1)(b)(c) states that the operator of a motor vehicle operated on a highway shall provide for the protection of each person younger than five years of age by using a child restraint device to restrain each person in the manner prescribed by the manufacturer of the device and provide for the protection of each person five years of age up to 16 years of age by using an appropriate child restraint device to restrain each person in the manner prescribed by the manufacturer of the device or securing, or causing to be secured, a properly adjusted and fastened safety belt. The purpose of this rule is to adopt the standards and specifications that a child restraint device and safety belt must meet in order to be approved by the commissioner of public safety.

     

    R714-240-2. Authority.

    This rule is authorized by Subsection 53-1-106(1)(a).

     

    R714-240-3. Federal Standards and Specifications Adopted and Incorporated by Reference.

    The type of child restraint device and safety belt approved by the commissioner of public safety for use in Utah is a child restraint device and safety belt which meet the standards and specifications set forth in 49 CFR 571.213 (2006 edition). The standards and specifications in such federal regulation are adopted for use in Utah and such federal regulation is incorporated into this rule by this reference.

     

    KEY: seat belts, motor vehicle safety

    Date of Enactment or Last Substantive Amendment: December 10, 2008

    Notice of Continuation: July 2, 2012

    Authorizing, and Implemented or Interpreted Law: 41-6a-1803(1)(b)(c) ]


Document Information

Effective Date:
8/21/2017
Publication Date:
07/15/2017
Type:
Notices of Proposed Rules
Filed Date:
06/29/2017
Agencies:
Public Safety, Highway Patrol
Rulemaking Authority:

Section 41-6a-1803

Authorized By:
Steven Winward, Captain
DAR File No.:
41864
Summary:

This rule is being repealed because the requirements regarding the use of safety belts and child restraint devices are included in Section 41-6a-1803, and adoption of standards set forth in 49 CFR 571.213 is included in Subsection 41-6a-1601(2)(c)(ii). Due to the fact that the information contained in the rule is now included in the Utah Code, the rule is no longer needed. This rule is repealed in its entirety.

CodeNo:
R714-240
CodeName:
{1787|R714-240|R714-240. Standards and Specifications for Child Restraint Devices and Safety Belts.}
Link Address:
Public SafetyHighway PatrolCALVIN L RAMPTON COMPLEX4501 S 2700 WSALT LAKE CITY, UT 84119-5994
Link Way:

Steven Winward, by phone at 801-550-6163, by FAX at , or by Internet E-mail at swinward@utah.gov

Kim Gibb, by phone at 801-556-8198, by FAX at 801-964-4482, or by Internet E-mail at kgibb@utah.gov

Greg Willmore, by phone at 801-965-4889, by FAX at , or by Internet E-mail at gwillmor@utah.gov

AdditionalInfo:
More information about a Notice of Proposed Rule is available online. The Portable Document Format (PDF) version of the Bulletin is the official version. The PDF version of this issue is available at https://rules.utah.gov/publicat/bull_pdf/2017/b20170715.pdf. The HTML edition of the Bulletin is a convenience copy. Any discrepancy between the PDF version and HTML version is resolved in favor of the PDF version. Text to be deleted is struck through and surrounded by brackets ([example]). Text ...
Related Chapter/Rule NO.: (1)
R714-240. Standards and Specifications for Child Restraint Devices and Safety Belts.