No. 39407 (Repeal and Reenact): Rule R70-101. Bedding, Upholstered Furniture and Quilted Clothing

(Repeal and Reenact)

DAR File No.: 39407
Filed: 05/18/2015 03:04:33 PM

RULE ANALYSIS

Purpose of the rule or reason for the change:

The reason for the change is to totally reorganize the rule to make it easier to read and understand, to eliminate a conflict in standards, and to make changes reflecting current industry practices.

Summary of the rule or change:

The new rule changes the cleanliness standard for down and feathers. The previous rule had a much lower standard of cleanliness. The new rule explicitly lists out the information necessary for the law tags and labels. It specifies the font, color, and language to be used. The old rule only listed the color and size for the law label and tags. The new rule reorganizes the sections so as to create greater convenience in reading the rule. The new rule clarifies what items are exempt from the rule.

State statutory or constitutional authorization for this rule:

• Section 4-10-3
• Section 4-3-2

This rule or change incorporates by reference the following material:

• Adds 16 CFR 300, published by FTC, 2012
• Adds USA 2000 Labeling Standards, published by IDFL Laboratory and Institute, 2009
• Removes Plumage Regulations, published by IABFLO, 2001
• Adds ASTM D4522-14, published by ASTM International, 2014
• Adds Classification of Filling Material, published by IABFLO, 2015
• Adds 16 CFR 303, published by FTC, 2004
• Adds 16 CFR 301, published by FTC, 2012
• Adds Manual of Labeling Law, published by International Sleep Products Association, 2015

Anticipated cost or savings to:

the state budget:

The change will have no effect on how the program operates, nor does it add to the duties, fees, or work of the employees of the state. It will neither hurt nor help the state budget.

local governments:

Local government have no responsibilities in Rule R70-101. There will be no budgetary impact to them.

small businesses:

Based on information from the small business regulated, they are already in compliance with the newly proposed standards and will not have additional cost associated with the change.

persons other than small businesses, businesses, or local governmental entities:

The agency has determined that there will be no cost or savings to the industry. There will be no cost to pass on to customers because industry is already following the new cleanliness standards.

Compliance costs for affected persons:

The cost of compliance will not change since the industry is already compliant with the newly proposed standards.

Comments by the department head on the fiscal impact the rule may have on businesses:

The proposed changes modernize Rule R70-101 and bring Utah's standards to align with current industry standards. In practicality, there will be no impact on the regulated industry. Further the reorganization will make it easier to understand the standards.

LuAnn Adams, Commissioner

The full text of this rule may be inspected, during regular business hours, at the Division of Administrative Rules, or at:

Agriculture and Food
Regulatory Services
350 N REDWOOD RD
SALT LAKE CITY, UT 84116-3034

Direct questions regarding this rule to:

• Kathleen Mathews at the above address, by phone at 801-538-7103, by FAX at 801-538-7126, or by Internet E-mail at [e-mail]
• Travis Waller at the above address, by phone at 801-538-7150, by FAX at 801-538-7124, or by Internet E-mail at [e-mail]
• Scott Ericson at the above address, by phone at 801-538-7102, by FAX at 801-538-7126, or by Internet E-mail at [e-mail]

Interested persons may present their views on this rule by submitting written comments to the address above no later than 5:00 p.m. on:

07/15/2015

This rule may become effective on:

07/22/2015

Authorized by:

LuAnn Adams, Commissioner

RULE TEXT

R70. Agriculture and Food, Regulatory Services.

R70-101. Bedding, Upholstered Furniture and Quilted Clothing.

[R70-101-1. Authority.

A. Promulgated Under Authority of Section 4-10-3.

B. Scope: The purpose of these rules is to designate the license fees, labeling, terms, definitions, nomenclature and conditions as commonly used and recognized in the manufacture, sale and distribution of bedding, upholstered furniture, quilted clothing products, and filling materials.

 

R70-101-2. General Requirements.

A. These rules shall apply to all persons, partnerships, corporations, limited liability companies, and associations engaged in the business of manufacturing, retailing, wholesaling, processing, repairing, and selling items of bedding, upholstered furniture, quilted clothing, and filling materials. These rules do not apply to persons who make or renovate upholstered furniture, clothing or bedding for their own use.

B. Foreign, out-of-state articles or materials sold in Utah. This rule shall apply to bedding, upholstered furniture, quilted clothing, and filling materials sold in Utah regardless of their point of origin.

 

R70-101-3. Definitions.

A. "Manufacture" means to make, process, or prepare from new or secondhand material, in whole or in part, any bedding, upholstered furniture, quilted clothing, or filling material for sale; but does not include isolated sales of such articles by persons who are not primarily engaged in the making, processing, or preparation of these articles. For the purpose of the enforcement of this rule, the term "manufacturer" shall mean a person who either by himself or through employees makes for the purpose of sale any bedding, upholstered furniture, quilted clothing, filling material, or any unit thereof.

B. "Non-resident" means a person licensed under these rules who does not have premises in the State of Utah.

C. "Old" means filling material or portion thereof which shows characteristics of aging through deterioration or changing from its original qualities.

D. "Person" means an individual, partnership, association, firm, auctioneer, trust, limited liability company, or corporation, and agents, servants and employees of them.

E. "Premises" means all places where bedding, upholstered furniture, quilted clothing, or filling material is sold, offered for sale, exposed for sale, stored, renovated or manufactured, and the delivery vehicles used in their transportation.

F. "Supply dealer" means a person who manufactures, processes or sells at wholesale any felt, batting, pads or other filling, loose in bags, in bales or in containers, concealed or not concealed, intended for use in bedding, upholstered furniture, or quilted clothing.

G. "Sell" or any of its variants includes any combination of the following: sale, offer, or expose for sale, barter, trade, deliver, rent, consign, lease, possess with the intent to sell or dispose of in any other commercial manner; but does not include any judicial, executor, administrator or guardian sale. The possession of any article of bedding, upholstered furniture, quilted clothing, or filling material defined in these rules, by any maker, dealer, or his agents or servants in the course of business, shall be presumptive evidence of intent to sell.

H. "Uniform Registry Number", "URN", or "state-issued registry number" means the number issued by a state to be used on the law tag of bedding, furniture, or filling materials to identify the manufacturing facility, person, or company accepting responsibility for such products.

 

R70-101-4. License.

Except as otherwise provided in these rules, any person who advertises, solicits or contracts to manufacture, repair or wholesale any bedding, upholstered furniture, quilted clothing, or filling materials who either does the work himself or has others do it for him, shall secure the particular license for the particular type of work that he solicits or advertises that he does, regardless of whether he has a shop or factory. This license shall be obtained before such products are offered for sale in Utah.

A. Annual license fee. The fee imposed for each license granted under these rules shall be approved by the Legislature.

When the appropriate fee is not paid on or before January 1, the license shall become delinquent, and there shall be added to the fee a late penalty, as approved by the Legislature in the Departments schedule of fees.

B. Suspension or revocation of license and procedure. In addition to other remedies provided in this rule, the Department shall have the authority to suspend or revoke any registration or license required by this rule for any violation of their provisions. A suspension or revocation shall be handled as outlined in Section 4-1-5.

 

R70-101-5. Sanitation Requirements.

A. Use of unsanitary filling material. The premises, delivery equipment, machinery, appliances, and devices of all persons licensed under these rules shall at all times be kept free from refuse, dirt, contamination or insects and no person shall use in the making, repair or renovating of bedding, upholstered furniture, or quilted clothing any filling material:

1. that contains any bugs, vermin or filth;

2. that is unsanitary;

3. that contains burlap or other material that has been used for baling.

 

R70-101-6. Manufacturing, Distribution, Advertising, Labeling and Sale of Quilted Clothing.

A. This section establishes standards and procedures relating to quilted clothing. The department adopts by reference the Rules and Regulations under the Textile Fiber Products Identification Act, July 9, 1986 edition; under the Fur Products Labeling Act, July 4, 1980 edition; and under the Wool Products Labeling Act of 1939, July 9, 1986 edition; excepting that wherever conflicts arise, the state rule shall govern.

B. Articles of plumage-filled clothing shall meet the following requirements:

1. Articles labeled "Down" shall contain a minimum of 75% down and plumules. The minimum down cluster percentage must be listed.

2. Articles containing less than 75% down, shall label the percentages of down and feathers contained therein and shall contain at a minimum the percentage of "Down" printed on the tag.

 

R70-101-7. Manufacturer Identification and Tag Requirements.

A. The identification of a manufacturer, wholesaler, or supply dealer of quilted clothing or filling material which is to appear on the label and on the tag shall be the same as required in rule 19-20 of the Federal Textile Fiber Products Identification Act and Wool Products Labeling Act, and the Federal Trade Commission Rules and Regulations.

The form of identification used on labels and on the tags shall be the same supplied to the Department on the application for registration.

B. For articles of bedding and upholstered furniture, the law tag shall use the format adopted by the International Association of Bedding and Furniture Law Officials (IABFLO), as listed in the "Tagging Law Manual" of the International Sleep Products Association (ISPA). A copy of the current edition of the "Tagging Law Manual" is available for public inspection at the Utah Department of Agriculture and Food, 350 North Redwood Road, Salt Lake City, Utah.

1. Tags on articles manufactured wholly of new material shall be white in color.

2. Tags on articles manufactured in whole or in part of secondhand materials and tags for "Owners Own Material" shall be yellow.

3. Color of ink on tags shall be black.

4. Tags shall be made of material that cannot be torn or easily abraded, and shall be the required color on both surfaces.

5. All required information shall be clearly and legibly printed in English and printed on one side of the tag only.

6. Tags shall be firmly attached to the article(s) in a position easily visible for examination. Regulated products which are offered for sale in boxes or in some other packaging which makes the law tags attached to the products themselves inaccessible, shall reproduce a fully legible facsimile of the law tag on the outer container or covering.

7. No mark, label, printed matter, illustration, sticker or any other device shall be placed upon the tags in such a way as to cover the required information.

8. A single uniform registry number (URN), issued by the state in which the firm is first registered, shall be used on the law tag. The firm's license with the state that issued the URN must be kept current for the number to be valid for use on products sold or offered for sale in Utah.

C. Every firm doing business under more than one state-issued uniform registry number (URN) shall obtain a license for each number used on products that are offered for sale in Utah. (A change of suffix on a URN shall constitute a new number and require an additional license.)

D. Retailers selling used mattresses shall display such mattresses with a tag stating "USED" that is clearly visible to a customer.

1. Tags shall be yellow in color.

2. Tags shall be a minimum of three inches by six inches.

3. Font shall be a minimum of one inch in height.

4. Color of ink on tags shall be black.

 

R70-101-8. Generic Names, Grades, Descriptive Terms, and Definitions of Filling Material.

A. The filling material shall be described on the label and on the tag by the true generic name, grade, description term, or definitions of the filling material as accepted and approved by the Department. When more than one kind of filling material is used in a mixture, the percent by weight of each shall be listed in order of their predominance. Federal fiber tolerance standards are applicable, except as pertains to plumage products.

B. Blends may be described, if applicable, as under Section 14 in this rule. In the case of non-down and/or non-feather filled articles of quilted clothing, any fiber or groups of individual fibers present in an amount of less than 5% by weight, of the total fiber content may be designated only as "other fiber" or "other fibers".

C. When different filling materials are used in various parts of the garment, the areas of the garment shall be named, followed by the name of the filling material used in that area. Examples:

Body - 50% Down, 50% Feathers

Sleeves - Polyester Fiber

Pockets - Nylon Fiber

D. Use of trade names and non-generic terms to describe filling material(s) is prohibited.

 

R70-101-9. Use of Rubber Stamp or Stencil.

A rubber stamp or stencil may be used in lieu of a tag on articles having a smooth backing on which the imprint can be legibly and indelibly stamped, and on suitable surfaces of bales or containers of felt, batting, pads, or other filling material used or to be used in bedding, upholstered furniture, and quilted clothing products.

 

R70-101-10. Making or Selling Material or Parts.

A person shall not purchase, make, process, prepare, or sell, directly or indirectly, at wholesale or retail or otherwise, any filling material or other component parts to be used in bedding, upholstered furniture, or quilted clothing, unless such material is plainly tagged as described in this rule.

 

R70-101-11. Labeling of Foreign Articles.

Responsibility for labeling of unlabeled foreign-made bedding, upholstered furniture, quilted clothing, and filling material in compliance with this rule shall rest with the person selling the merchandise in Utah.

 

R70-101-12. Violation of This Rule.

A. It shall be a separate violation of this rule for each improperly labeled or tagged or unlabeled or untagged article of bedding, upholstered furniture, quilted clothing, or filling material made, sold, exposed or offered for sale, delivered, consigned, rented or possessed with intent to sell contrary to the provisions of this rule.

B. Defense. No person shall be guilty of a violation of this rule if he has received, from the person by whom the articles were manufactured or from whom they were received, a guarantee in good faith that the articles are not contrary to the provisions of these rules. The guarantee shall be in the form prescribed by the Federal Textile Fiber Products Identification Act, the Federal Wool Products Labeling Act and the Federal Trade Commission Rules and Regulations.

 

R70-101-13. Enforcement Procedures.

A. Removal of Inspector's Tag. Any person who removes, or causes to be removed, any tag or device placed upon any article of bedding, upholstered furniture, quilted clothing, or filling material, by an inspector in the performance of his official duties, is guilty of violation of this rule.

B. Failure to Produce Articles Condemned. The failure of any person to produce upon demand of an inspector any article that has been condemned and ordered held on inspection notice signed by the person, or an inspection notice that the person has refused to sign, is a violation of this rule.

C. Interfere, Hinder Inspector. No person shall interfere with, obstruct, or otherwise hinder any inspector of the Department in the performance of his duties.

D. Retailers are Responsible to:

1. ensure that any article of bedding, upholstered furniture, or filling material they sell is labeled with a uniform law tag;

2. ensure that quilted clothing tags list filling material(s) and the name or Registered Number (RN) of the manufacturer or distributor;

3. fully comply with the Department's laws and rules governing false and misleading advertisement;

4. and make sure that all manufacturers from whom they purchase products that come under the purview of the act, hold a valid license with the Department.

5. In addition, upon request of any representative of the Department, a retailer shall provide the Department with the identity of the manufacturer or wholesaler of any article of bedding, upholstered furniture, quilted clothing, or filling material sold by that retailer.

6. If the manufacturer or wholesaler so identified is not registered pursuant to this rule and fails or refuses to register upon notification by the Department, any article of bedding, upholstered furniture, quilted clothing, or filling material manufactured or wholesaled by the manufacturer or wholesaler and sold or offered for sale in this state may be withheld from sale until the manufacturer or wholesaler registers; provided, that in the event the manufacturer or wholesaler fails to register, the retailer may register in lieu of the manufacturer or wholesaler.

 

R70-101-14. Rules and Regulations for Filling Material.

A. All terms and definitions of all filling materials shall be those terms which have been submitted to and approved by IABFLO, except those terms and definitions listed in this rule.

B. The document entitled "Plumage Regulations", the 2001 edition, approved by IABFLO, is adopted and incorporated by reference within this rule.

C. Cleanliness of Filling Materials.

All filling materials shall be reasonably clean and free from extraneous material, dirt, dust, filth, epidermis, excreta, disagreeable odors, or other contamination.

"Cleanliness" shall mean the oxygen number of any filling material consisting of whole feathers, down, or a combination thereof; and the oxygen number of any filling material consisting of an admixture of feathers and down which contains five percent (5%) of crushed feathers shall not exceed 25 grams of oxygen per 100,000 grams of sample. (Oxygen number is considered to be the amount, by weight, of oxidizable matter such as blood, excreta, and/or fecal matter present.)

D. "Imperfect, irregular foam" shall mean any foam products which show major imperfections or that fall below the foam manufacturer's usual standards or specifications and must be stated on the tag as "imperfect" or "irregular" along with the generic name of the foam.

E. "Imperfect, irregular fibers" shall mean fibers that have imperfections or that fall below the fiber manufacturer's usual standards or specifications and must be stated on the tag as "imperfect" or "irregular" along with the generic name of the fiber.

F. The terms "Prime","Super","Northern" and other terms of similar import shall not be used unless the fill can be proved to be of superior quality and meet the terms of the qualifying statement. Industry shall be responsible for proving to the Department that the fill is superior to the industry standard rating of 550 cubic inches of fill power.

 

R70-101-15. Products Not Intended for Uses Subject to This Rule.

A. The Commissioner hereby excludes from this rule all textile fiber products related to quilted clothing except:

1. Articles of down, feather, or fiber filled clothing.

2. Down, feather, or fiber filled hats and hoods.

3. Down, feather, or fiber filled slippers and booties with fabric outer-covering.

4. Down, feather, or fiber filled gloves.

5. Bulk filling material used in the above.]

R70-101-1. Authority and Purpose.

Pursuant to Section 4-10-3, this rule establishes the standards, practices and procedures for the manufacture, repair, sale, and distribution of bedding, upholstered furniture, quilted clothing products, and filling materials.

 

R70-101-2. Definitions.

1) "Clean" means free from stains, dirt, trash, filth, pulp, sludge, oil, grease, fat, skin, epidermis, excreta, vermin, insects, insect eggs, insect carcasses, contamination, hazardous materials, residual or objectionable substances or odors.

2) "Department" means the Utah Department of Agriculture and Food.

3) "Law Label or Label" means a tag attached to a product that provides information about the product to the consumer.

4) "Manufacture" means the making, processing, or preparing of new or secondhand bedding, upholstered furniture, quilted clothing, or filling material.

5) "Manufacturer" means a person who makes or has employees make any bedding, upholstered furniture, quilted clothing, filling material, or any part thereof.

6) "Non-resident" means a person licensed under these rules who does not have premises in the State of Utah.

7) "Person" means an individual, partnership, association, firm, auctioneer, trust, limited liability company, or corporation, and agents, and employees of them.

8) "Premises" means all places where bedding, upholstered furniture, quilted clothing, or filling material is sold, offered for sale, exposed for sale, stored, renovated or manufactured and the delivery vehicles used in their transportation.

9) "Supply dealer" means a person who manufactures, processes, or sells at wholesale any felt, batting, pads, or other filling, loose in bags, in bales or in containers, concealed or not concealed, intended for use in bedding, upholstered furniture, or quilted clothing.

10) "Second Hand Law Tag or Tag" means a tag attached to a product or filling material that has previously been used.

11) "Uniform Registry Number or URN" means the number issued by a state to be used on the law label of bedding, furniture, or filling materials to identify the manufacturing facility, person, or company.

 

R70-101-3. Application of Rule.

1) This rule shall apply to all persons engaged in the business of manufacturing, retailing, wholesaling, processing, repairing, and selling items of bedding, upholstered furniture, quilted clothing and filling materials, regardless of their point of origin.

 

R70-101-4. Licensing Requirements for Manufacturers, Repairers, and Wholesalers.

1) Any person, who advertises, solicits, or contracts to manufacture or repair bedding, upholstered furniture, quilted clothing, or filling materials shall secure a license from the department.

a) This license must be obtained before such products are offered for sale in Utah.

2) Any person seeking a license shall provide the following to the department:

a) a complete registration application form,

b) a sample of the identification label that will be used, and

c) a sample tag

i) wholesale bedding, upholstered furniture dealers, upholstery supply dealer, and quilted clothing manufacturers are exempted from providing a sample tag to the department.

3) A licensing fee will be assessed annually. This fee shall be paid before January 1 or a late fee will be assessed. All fees are listed in the department's fee schedule approved by the legislature.

 

R70-101-5. Revocation of License.

1) The department shall have the authority to suspend or revoke a license for any violation of these provisions.

2) A suspension or revocation shall be in accordance with section 4-1-5.

 

R70-101-6. Sanitation Requirements.

1) The premises, delivery equipment, machinery, appliances, and devices shall at all times be kept free from refuse, dirt, contamination, or insects.

2) No person shall use in the making, repairing, or renovating of bedding, upholstered furniture, or quilted clothing any filling material that:

a) contains any bugs, vermin or filth,

b) is not clean, or

c) contains burlap or other material that has been used for baling.

3) Bedding, quilted clothing, and filling materials shall be stored four inches off the floor.

4) New and used products shall be stored separately.

 

R70-101-7. Manufacturing, Wholesale, and Supply Dealer Labeling Requirements for Quilted Clothing.

1) The department adopts by reference the Rules and Regulations under the Textile Fiber Products Identification Act, Fur Products Labeling Act, and Wool Products Labeling Act found in 16 CFR parts 300, 301, and 303.

2) Articles of plumage-filled clothing shall meet the following label requirements:

a) Any label stating the contents of Down, Goose Down, or Duck Down shall also state the minimum percentage of Down, Goose Down, or Duck Down that is contained in the article. The down label is a qualified general label and shall include in parentheses the minimum percentage of down in the product which must be 75% or greater.

b) Down and Waterfowl Feathers: may be used to designate any plumage product containing between 50% (minimum) and 74% down and plumules. The percentage of both must be stated on the sewn-in label and hang tags,

c) Waterfowl Feathers and Down: may be used to designate any plumage product containing between 5% (minimum) and 49% down and plumules. The percentage of both must be stated on the sewn-in label and hang tags.

d) Waterfowl Feathers: may be used to designate any plumage product containing less than 5% down and plumules.

e) Quill Feathers are not permitted unless disclosed.

f) Other Plumage Products which do not meet the requirements for any of the above listed categories must be labeled accurately with each component listed separately in order of predominance.

3) The form of identification used on labels and tags shall be the same as those supplied to the department with the registration application.

 

R70-101-8. Filling Material.

1) All terms and definitions of filling materials shall be those terms which have been submitted and approved by International Association of Bedding Law Officials (IABFLO), except as otherwise required by this rule.

2) All plumage materials shall follow the standards as set forth in the "USA-2000 Labeling Standards- Down & Feather Products" and ASTM D-4522.

3) All other filling materials shall be clean.

4) "Imperfect, irregular foam" means any foam products which show major imperfections or that fall below the foam manufacturer's usual standards or specifications and must be stated on the tag as "imperfect" or "irregular" along with the generic name of the foam.

5) "Imperfect, irregular fibers" shall mean fibers that have imperfections or that fall below the fiber manufacturer's usual standards or specification and must be stated on the tag as "imperfect" or irregular" along with the generic name of the fiber.

6) The terms "Prime", "Super", "Northern" and similar terms shall not be used unless the fill can be proved to be of superior quality and meet the terms of the qualifying statement.

 

R70-101-9. Generic Names, Grades, Descriptive Terms, and Definitions of Filling Material.

1) Filling material shall be described on the label and on the tag using the:

a) true generic name,

b) grade,

c) description terms, or

d) definitions of the filling material which have been approved by the department.

2) When more than one kind of filling material is used in a mixture, the percentage by weight shall be listed in order of predominance.

a) Federal fiber tolerance standards are applicable, except as pertains to plumage products.

b) Blends may be described in accordance with section 8 of this rule.

3) When different filling materials are used in various parts of the garment the areas of the garment shall be named, followed by the name of the filling material used in that area.

 

R70-101-10. Manufacturer Identification and Law Label Requirements For Bedding and Upholstered Furniture.

1) The form of identification used on labels and tags shall be the same as those supplied to the department with the registration application.

2) For articles of bedding and upholstered furniture, the law label shall use the format adopted by the IABFLO, as listed in the "Manual of Labeling Laws" of the International Sleep Products Association (ISPA). A copy of the current edition of the "Manual of Labeling Laws" is available for public inspection at the Utah Department of Agriculture and Food, 350 North Redwood Road, Salt Lake City, Utah.

(3) The law label for newly manufactured products shall meet the following requirements:

a) white on all sides of the label,

b) made of material that cannot be torn,

c) printed in black ink

d) printed in English,

e) printed clearly and legibly, and

f) firmly attached to the article

4) All required information shall be printed on one side of the label with the opposite side remaining blank.

5) Each law label shall state the following:

a) the phrase "UNDER PENALTY OF LAW THIS TAG NOT TO BE REMOVED EXCEPT BY THE CONSUMER" shall appear in bold at the top of the label in capital letters no less than 1/8 inches in height,

b) the phrase "ALL NEW MATERIAL" shall appear in the next section in bold, capital letters no less the 1/8 inches in height, followed by the phrase "CONSISTING OF" followed by the filling contents in bold capital letters no less than 1/8 inch in height,

c) the phrase, "Certification is made that the materials in this article are described in accordance with law" shall appear in the next section of the tag,

d) the URN issued by the state in which the firm is first registered shall appear next, and

e) the name and complete address of the manufacturer, importer, or vendor of the article shall appear next.

6) The law label shall be easily accessible to the consumer for examination.

a) Products which are offered for sale in boxes or in some other packaging which make the law labels inaccessible shall reproduce a legible facsimile of the law label on the outer container or covering.

7) No mark, label, printed matter, illustration, sticker, or any other device shall be placed upon the label.

8) The firm's license with the state that issued the URN must be kept current for the number to be valid in the state of Utah.

9) Every firm doing business under more than one state-issued URN shall obtain a license for each number used on products that are offered for sale in Utah.

 

R70-101-11. Second Hand Law Tags and Tagging Requirements.

1) Tags for second hand materials shall be:

a) a minimum of 2 inches by 3 inches,

b) yellow on both sides of the tag,

c) made of material that cannot be torn,

d) printed in English,

e) printed in black ink,

f) printed clearly and legibly, and

g) firmly attached to the article.

2) All required information shall be printed on one side of the tag with the opposite side remaining blank.

3) Second hand tag shall contain the following information:

a) the phrase "UNDER PENALTY OF LAW THIS TAG NOT TO BE REMOVED EXCEPT BY THE CONSUMER" shall appear in bold at the top of the label in capital letters, no less than 1/8 inch in height,

b) the phrase, "THIS ARTICLE CONTAINS SECOND HAND MATERIAL CONSISTING OF CONTENTS UNKNOWN" shall appear in the next section of the tag. The words "second hand material" and "contents unknown" shall be in capital letters, size not less than 1/8 inches in height,

c) the phrase, "Certification is made that the materials in this article are described in accordance with law" shall appear in the next section of the tag, and

d) the store name and complete corporate address shall appear next.

4) The tag shall be easily accessible to the consumer for examination.

5) No mark, label, printed matter, illustration, sticker, or any other device shall be placed upon the tag.

 

R70-101-12. Second Hand Tag and Tagging Requirements for Repaired, Reupholstered, and Renovated Products.

1) Tags for repaired, reupholstered, and renovated products shall be:

a) a minimum of 2 inches by 3 inches,

b) yellow on both sides of the tag,

c) made of material that cannot be torn,

d) have the required information printed on one side of the tag,

e) printed in English,

f) printed in black ink,

g) printed clearly and legibly, and

h) firmly attached to the article.

2) All required information shall be printed on one side of the tag with the opposite side remaining blank.

3) Second hand tag shall contain the following information:

a) the phrase, "UNDER PENALTY OF LAW THIS TAGE NOT TO BE REMOVED EXCEPT BY THE CONSUMER" shall appear in bold at the top of the label in capital letters, no less than 1/8 inch in height,

b) the phrase, "THIS ARTICLE IS NOT FOR SALE OWNER'S MATERIAL" shall appear next in bold 1/8 inch in height,

c) the phrase, "CERTIFICATION IS MADE THAT THIS ARTICLE CONTAINS THE SAME MATERIAL IT DID WHEN RECEIVED FROM THE OWNER AND THAT ADDED MATERIALS ARE DESCRIBED IN THE ACCODANCE WITH LAW, AND CONSIST OF THE FOLLOWING:" followed by a description of the filling materials,

d) a description of the work that was done on the product,

e) the URN number,

f) the name and address of the renovator or repairer, and

g) the date of pick-up, owner's name, and address.

 

R70-101-13. Used Mattresses.

1) Retailers selling customer returns, refurbished, or used mattresses shall follow the second hand law tag requirements as set out in R70-101-11.

2) In addition, retailers must also display on such mattresses a tag stating "USED" in bold capital letters.

3) The Used tag shall be:

a) a minimum 3 inches by 6 inches,

b) yellow on both sides of the tag,

c) the font shall be a minimum of one inch in height,

d) printed in black ink, and

e) printed in English.

4) All required information shall be printed on one side of the tag with the opposite side remaining blank.

5) The USED tag shall be clearly visible to the consumer at all times.

 

R70-101-14. Variance.

1) The department may issue variances on labeling and tagging requirements.

2) Requests for a variance must be made to the department in writing and must contain the following information:

a) For what product you are requesting the variance,

b) where you are going to be using the variance,

c) an explanation of the need for a variance,

d) a description of how the variance will be used in practice, and

e) an example of the label or tag that will be used in place of the required label or tag.

3) Approval of variances will be given from the department in writing.

4) All variances shall be subject to a period of review.

 

R70-101-15. Making or Selling Material or Parts.

1) A person shall not purchase, make, process, prepare, or sell, directly or indirectly, at wholesale or retail, or otherwise, any filling material or other component parts to be used in bedding, upholstered furniture, or quilted clothing, unless such material appropriately tagged.

 

R70-101-16. Retailer Responsibilities.

1) Retailers shall:

a) ensure that any article of bedding, upholstered furniture, quilted clothing, or filling material they sell is labeled and tagged correctly,

b) comply with the department's laws and rules governing false and misleading advertisement, and

c) ensure that all manufacturers from whom they purchase products hold a valid license with the department.

2) Retailers shall provide the identity of the manufacturer or wholesaler of any article of bedding, upholstered furniture, quilted clothing, or filling material sold upon request of the department.

3) A retailer may register in lieu of the manufacturer or wholesaler if the manufacturer or wholesaler is not registered.

 

R70-101-17. Violation of this Rule.

1) Each improperly labeled or tagged article of bedding, upholstered furniture, quilted clothing, or filling material made or sold shall be a separate violation of this rule.

2) No person shall be in violation if he has received, from the person by whom the articles were manufactured or from whom they were received, a guarantee in good faith that the articles are not contrary to the provisions of these rules in the form prescribed by the Federal Textile Fiber Products Identification Act, Federal Wool Products Labeling Act, and the Federal Trade Commission Rules and Regulations.

3) No person shall remove, or cause to be removed, any tag, or device placed upon any article of bedding, upholstered furniture, quilted clothing, or filling material by an inspector.

4) No person may remove an article that has been condemned and ordered held on inspection notice.

5) No person shall interfere with, obstruct, or hinder any inspector of the department in the performance of their duties.

6) Any article of bedding, upholstered furniture, quilted clothing, or filling material manufactured or wholesaled by the manufacturer or wholesaler who is not registered may be withheld from sale until the manufacturer or wholesaler registers.

 

R70-101-18. Products Not Intended for Uses Subject to This Rule.

1) The Commissioner may exclude from this rule textile fiber products which:

a) Have insignificant or inconsequential textile fiber content, or

b) The disclosure of the textile fiber content is not necessary for the protection of the consumer.

 

KEY: quality control

Date of Enactment or Last Substantive Amendment: [October 22, 2014]2015

Notice of Continuation: March 16, 2015

Authorizing, and Implemented or Interpreted Law: 4-10-3

 

---