No. 30172: R156-55a. Utah Construction Trades Licensing Act Rules

DAR File No.: 30172
Filed: 09/20/2007, 03:51
Received by: NL

RULE ANALYSIS

Purpose of the rule or reason for the change:

Following a public rule hearing held on 08/29/2007, the Construction Services Commission and the division are proposing an additional change to the contractor license classification of S214 to return this license classification to its original wording. The plumbing industry and the Plumbers Licensing Board came out in opposition to the proposed rule amendment with respect to S214-Water Conditioning and Potable Water Heater Equipment Contractor license classification. It is their position that the proposed change to include potable water heaters would be detrimental to plumbing contractors involved in the service industry. Also, the public could be harmed if the venting for water heating was not correctly done. The groups supported the current language in the existing administrative rule. The Construction Services Commission voted in their 08/29/2007 meeting to reject the proposed rule amendment with respect to the S214 license classification and to retain the current, existing language.

Summary of the rule or change:

In Section R156-55a-301, amendments were made to S214 license classification to return the wording to its original definition. Also, in Subsections R156-55a-301(3)(b), and (c), a misspelled word was corrected. (DAR NOTE: This change in proposed rule has been filed to make additional changes to a proposed amendment that was published in the August 1, 2007, issue of the Utah State Bulletin, on page 3. Underlining in the rule below indicates text that has been added since the publication of the proposed rule mentioned above; strike out indicates text that has been deleted. You must view the change in proposed rule and the proposed amendment together to understand all of the changes that will be enforceable should the agency make this rule effective.)

State statutory or constitutional authorization for this rule:

Section 58-55-101, and Subsections 58-5-106(1)(a), 58-1-202(1)(a), 58-55-308(1), 58-55-102(35), and 58-55-501(21)

Anticipated cost or savings to:

the state budget:

The division anticipates no additional costs or savings as a result of this change in proposed rule beyond those previously identified in the proposed rule filing.

local governments:

The change in proposed rule amendments do not apply to local governments; therefore, no costs or savings are anticipated. The change in proposed rule amendments only apply to licensed contractors and persons or companies applying for licensure as a contractor in Utah.

small businesses and persons other than businesses:

The following comments apply to both small businesses and persons other than businesses: The division anticipates no additional costs or savings as a result of this change in proposed rule beyond those previously identified in the proposed rule filing.

Compliance costs for affected persons:

The Division anticipates no additional costs or savings as a result of this change in proposed rule beyond those previously identified in the proposed rule filing.

Comments by the department head on the fiscal impact the rule may have on businesses:

This change in proposed rule returns contractor licensing classification S214-Water Conditioning Equipment Contractor to its original state due to comments received during the amendment process. It also makes a minor spelling correction. No fiscal impact to businesses is anticipated as a result of this change to proposed rule. Francine A. Giani, Executive Director

The full text of this rule may be inspected, during regular business hours, at the Division of Administrative Rules, or at:

Commerce
Occupational and Professional Licensing
HEBER M WELLS BLDG
160 E 300 S
SALT LAKE CITY UT 84111-2316

Direct questions regarding this rule to:

Dennis Meservy at the above address, by phone at 801-530-6375, by FAX at 801-530-6511, or by Internet E-mail at [e-mail]

Interested persons may present their views on this rule by submitting written comments to the address above no later than 5:00 p.m. on:

11/14/2007

This rule may become effective on:

11/21/2007

Authorized by:

F. David Stanley, Director

RULE TEXT

R156. Commerce, Occupational and Professional Licensing.

R156-55a. Utah Construction Trades Licensing Act Rule.

 

. . . . . . .

 

R156-55a-301. License Classifications - Scope of Practice.

(1) In accordance with Subsection 58-55-301(2), the classifications of licensure are listed and described in this section. The construction trades or specialty contractor classifications listed are those determined to significantly impact the public health, safety, and welfare. A person who is practicing a construction trade or specialty contractor classification which is not listed is exempt from licensure in accordance with Subsection 58-55-305(1)(i).

(2) Licenses shall be issued in the following primary classifications and subclassifications:

E100 - General Engineering Contractor. A General Engineering contractor is a contractor licensed to perform work as defined in Subsection 58-55-102(19).

B100 - General Building Contractor. A General Building contractor is a contractor licensed to perform work as defined in Subsection 58-55-102(18).

B200 - Modular Unit Installation Contractor. Set up or installation of modular units as defined in Subsection 58-56-3(11) and constructed in accordance with Section 58-56-13. The scope of the work permitted under this classification includes construction of the permanent or temporary foundations, placement of the modular unit on a permanent or temporary foundation, securing the units together if required and securing the modular units to the foundations. Work excluded from this classification includes installation of factory built housing and connection of required utilities.

R100 - Residential and Small Commercial Contractor. A Residential and Small Commercial contractor is a contractor licensed to perform work as defined in Subsection 58-55-102(28).

R101 - Residential and Small Commercial Non Structural Remodeling and Repair. Remodeling and repair to any existing structure built for support, shelter and enclosure of persons, animals, chattels or movable property of any kind with the restriction that no change is made to the bearing portions of the existing structure, including footings, foundation and weight bearing walls; and the entire project is less than $50,000 in total cost.

R200 - Factory Built Housing Contractor. Disconnection, setup, installation or removal of manufactured housing on a temporary or permanent basis. The scope of the work permitted under this classification includes placement of the manufactured housing on a permanent or temporary foundation, securing the units together if required, securing the manufactured housing to the foundation, and connection of the utilities from the near proximity, such as a meter, to the manufactured housing unit and construction of foundations of less than four feet six inches in height. Work excluded from this classification includes site preparation or finishing, excavation of the ground in the area where a foundation is to be constructed, back filling and grading around the foundation, construction of foundations of more than four feet six inches in height and construction of utility services from the utility source to and including the meter or meters if required or if not required to the near proximity of the manufactured housing unit from which they are connected to the unit.

I101 - General Engineering Trades Instructor. A General Engineering Trades Instructor is a construction trades instructor authorized to teach the construction trades and is subject to the scope of practice defined in Subsection 58-55-102(19).

I102 - General Building Trades Instructor. A General Building Trades Instructor is a construction trades instructor authorized to teach the construction trades and is subject to the scope of practice defined in Subsections 58-55-102(18) or 58-55-102(28).

I103 - Electrical Trades Instructor. An Electrical Trades Instructor is a construction trades instructor authorized to teach the electrical trades and subject to the scope of practice defined in Subsection R156-55a-301(S200).

I104 - Plumbing Trades Instructor. A Plumbing Trades Instructor is a construction trades instructor authorized to teach the plumbing trades and subject to the scope of practice defined in Subsection R156-55a-301(S210).

I105 - Mechanical Trades Instructor. A Mechanical Trades Instructor is a construction trades instructor authorized to teach the mechanical trades and subject to the scope of practice defined in Subsection R156-55a-301(S350).

S200 - General Electrical Contractor. Fabrication, construction, and/or installation of generators, transformers, conduits, raceways, panels, switch gear, electrical wires, fixtures, appliances, or apparatus which utilizes electrical energy.

S201 - Residential Electrical Contractor. Fabrication, construction, and/or installation of services, disconnecting means, grounding devices, panels, conductors, load centers, lighting and plug circuits, appliances and fixtures in any residential unit, normally requiring non-metallic sheathed cable, including multiple units up to and including a four-plex, but excluding any work generally recognized in the industry as commercial or industrial.

S202 - Solar Photovoltaic Contractor. Fabrication, construction, installation, and repair of photovoltaic cell panels and related components including battery storage systems, distribution panels, switch gear, electrical wires, inverters, and other electrical apparatus for solar photovoltaic systems. Work excluded from this classification includes work on any alternating current system or system component.

S210 - General Plumbing Contractor. Fabrication and/or installation of material and fixtures to create and maintain sanitary conditions in buildings, by providing a permanent means for a supply of safe and pure water, a means for the timely and complete removal from the premises of all used or contaminated water, fluid and semi-fluid organic wastes and other impurities incidental to life and the occupation of such premises, and provision of a safe and adequate supply of gases for lighting, heating, and industrial purposes. Work permitted under this classification shall include the furnishing of materials, fixtures and labor to extend service from a building out to the main water, sewer or gas pipeline.

S211 - Boiler Installation Contractor. Fabrication and/or installation of fire-tube and water-tube power boilers and hot water heating boilers, including all fittings and piping, valves, gauges, pumps, radiators, converters, fuel oil tanks, fuel lines, chimney flues, heat insulation and all other devices, apparatus, and equipment related thereto.

S212 - Irrigation Sprinkling Contractor. Layout, fabrication, and/or installation of water distribution system for artificial watering or irrigation.

S213 - Industrial Piping Contractor. Fabrication and/or installation of pipes and piping for the conveyance or transmission of steam, gases, chemicals, and other substances including excavating, trenching, and back-filling related to such work.

S214 - Water Conditioning [and Potable Water Heater ]Equipment Contractor. [Installation]Fabrication and/or installation of water conditioning equipment and only such pipe and fittings as are necessary for connecting the water conditioning equipment to the water supply system within the premises[, potable water heaters, and all piping and venting directly associated with the installation of the equipment].

S215 - Solar Thermal Systems Contractor. Construction, repair and/or installation of solar thermal systems up to the system shut off valve or where the system interfaces with any other plumbing system.

S216 - Residential Sewer Connection and Septic Tank Contractor. Construction of residential sewer lines including connection to the public sewer line, and excavation and grading related thereto. Excavation, installation and grading of residential septic tanks and their drainage.

S217 - Residential Plumbing Contractor. Fabrication and/or installation of material and fixtures to create and maintain sanitary conditions in residential building, including multiple units up to and including a four-plex by providing a permanent means for a supply of safe and pure water, a means for the timely and complete removal from the premises of all used or contaminated water, fluid and semi-fluid organic wastes and other impurities incidental to life and the occupation of such premises, and provision of a safe and adequate supply of gases for lighting and heating purposes. Work permitted under this classification shall include the furnishing of materials, fixtures and labor to extend service from a residential building out to the main water, sewer or gas pipeline. Excluded is any new construction and service work generally recognized in the industry as commercial or industrial.

S220 - Carpentry Contractor. Fabrication for structural and finish purposes in a structure or building using wood, wood products, metal studs, vinyl materials, or other wood/plastic/metal composites as is by custom and usage accepted in the building industry as carpentry.

S221 - Cabinet, Millwork and Countertop Installation Contractor. On-site construction and/or installation of milled wood products or countertops.

S222 - Overhead and Garage Door Contractor. The installation of overhead and garage doors and door openers.

S230 - Siding Contractor. Fabrication, construction, and/or installation of siding.

S231 - Raingutter Installation Contractor. On-site fabrication and/or installation of raingutters and drains, roof flashings, gravel stops and metal ridges.

S240 - Glass and Glazing Contractor. Fabrication, construction, installation, and/or removal of all types and sizes of glass, mirrors, substitutes for glass, glass-holding members, frames, hardware, and other incidental related work.

S250 - Insulation Contractor. Installation of any insulating media in buildings and structures for the sole purpose of temperature control, sound control or fireproofing, but shall not include mechanical insulation of pipes, ducts or conduits.

S260 - General Concrete Contractor. Fabrication, construction, mixing, batching, and/or installation of concrete and related concrete products along with the placing and setting of screeds for pavement for flatwork, the construction of forms, placing and erection of steel bars for reinforcing and application of plaster and other cement-related products.

S261 - Concrete Form Setting and Shoring Contractor. Fabrication, construction, and/or installation of forms and shoring material; but, does not include the placement of concrete, finishing of concrete or embedded items such as metal reinforcement bars or mesh.

S262 - Gunnite and Pressure Grouting Contractor. Installation of a concrete product either injected or sprayed under pressure.

S263 - Cementatious Coating Systems Resurfacing and Sealing Contractor. Fabrication, construction, mixing, batching and installation of cementatious coating systems or sealants limited to the resurfacing or sealing of existing surfaces, including the preparation or patching of the surface to be covered or sealed.

S270 - General Drywall and Plastering Contractor. Fabrication, construction, and installation of drywall, gypsum, wallboard panels and assemblies. Preparation of drywall or plaster surfaces for suitable painting or finishing. Application to surfaces of coatings made of plaster, including the preparation of the surface and the provision of a base. This does not include applying stucco to lathe, plaster and other surfaces. Exempted is the plastering of foundations.

S272 - Ceiling Grid Systems, Ceiling Tile and Panel Systems Contractor. Fabrication and/or installation of wood, mineral, fiber, and other types of ceiling tile and panels and the grid systems required for placement.

S273 - Light-weight Metal and Non-bearing Wall Partitions Contractor. Fabrication and/or installation of light-weight metal and other non-bearing wall partitions.

S280 - General Roofing Contractor. Application and/or installation of asphalt, pitch, tar, felt, flax, shakes, shingles, roof tile, slate, and any other material or materials, or any combination of any thereof which use and custom has established as usable for, or which are now used as, water-proof, weatherproof, or watertight seal or membranes for roofs and surfaces; and roof conversion. Incidental work includes the installation of roof clamp ring to the roof drain.

S290 - General Masonry Contractor. Construction by cutting, and/or laying of all of the following brick, block, or forms: architectural, industrial, and refractory brick, all brick substitutes, clay and concrete blocks, terra-cotta, thin set or structural quarry tile, glazed structural tile, gypsum tile, glass block, clay tile, copings, natural stone, plastic refractories, and castables and any incidental works, including the installation of shower pans, as required in construction of the masonry work.

S291 - Stone Masonry Contractor. Construction using natural or artificial stone, either rough or cut and dressed, laid at random, with or without mortar. Incidental work includes the installation of shower pans.

S292 - Terrazzo Contractor. Construction by fabrication, grinding, and polishing of terrazzo by the setting of chips of marble, stone, or other material in an irregular pattern with the use of cement, polyester, epoxy or other common binders. Incidental work includes the installation of shower pans.

S293 - Marble, Tile and Ceramic Contractor. Preparation, fabrication, construction, and installation of artificial marble, burned clay tile, ceramic, encaustic, falence, quarry, semi-vitreous, and other tile, excluding hollow or structural partition tile. Incidental work includes the installation of shower pans.

S294 - Cultured Marble Contractor. Preparation, fabrication and installation of slab and sheet manmade synthetic products including cultured marble, onyx, granite, onice, corian, and corian type products. Incidental work includes the installation of shower pans.

S300 - General Painting Contractor. Preparation of surface and/or the application of all paints, varnishes, shellacs, stains, waxes and other coatings or pigments.

S310 - Excavation and Grading Contractor. Moving of the earth's surface or placing earthen materials on the earth's surface, by use of hand or power machinery and tools, including explosives, in any operation of cut, fill, excavation, grading, trenching, backfilling, or combination thereof as they are generally practiced in the construction trade.

S320 - Steel Erection Contractor. Construction by fabrication, placing, and tying or welding of steel reinforcing bars or erecting structural steel shapes, plates of any profile, perimeter or cross-section that are used to reinforce concrete or as structural members, including riveting, welding, and rigging.

S321 - Steel Reinforcing Contractor. Fabricating, placing, tying, or mechanically welding of reinforcing bars of any profile that are used to reinforce concrete buildings or structures.

S322 - Metal Building Erection Contractor. Erection of pre-fabricated metal structures including concrete foundation and footings, grading, and surface preparation.

S323 - Structural Stud Erection Contractor. Fabrication and installation of metal structural studs and bearing walls.

S330 - Landscaping Contractor. Grading and preparing land for architectural, horticultural, and the decorative treatment, arrangement, and planting of gardens, lawns, shrubs, vines, bushes, trees, and other decorative vegetation. Construction of small decorative pools, tanks, and fountains. Hothouses and greenhouses, retaining walls, fences, walks, garden lighting of 50 volts or less, and sprinkler systems. Patio areas when they are an incidental part of the prime contract.

S340 - Sheet Metal Contractor. Layout, fabrication, and installation of air handling and ventilating systems. All architectural sheet metal such as cornices, marquees, metal soffits, gutters, flashings, and skylights and skydomes including both plastic and fiberglass.

S350 - HVAC Contractor. Fabrication and installation of complete warm air heating and air conditioning systems, and complete ventilating systems.

S351 - Refrigerated Air Conditioning Contractor. Fabrication and installation of air conditioning ventilating systems to control air temperatures below 50 degrees.

S352 - Evaporative Cooling Contractor. Fabrication and installation of devices, machinery, and units to cool the air temperature employing evaporation of liquid.

S353 - Warm Air Heating Contractor. Layout, fabrication, and installation of such sheet metal, gas piping, and furnace equipment as necessary for a complete warm air heating and ventilating system.

S360 - Refrigeration Contractor. Construction and/or installation of refrigeration equipment including, but not limited to, built-in refrigerators, refrigerated rooms, insulated refrigerated spaces and equipment related thereto; but, the scope of permitted work does not include the installation of gas fuel or electric power services other than connection of electrical devices to a junction box provided for that device and electrical control circuitry not exceeding 50 volts.

S370 - Fire Suppression Systems Contractor. Layout, fabrication, and installation of fire protection systems using water, steam, gas, or chemicals. When a potable sanitary water supply system is used as the source of supply, connection to the water system must be accomplished by a licensed journeyman plumber. Excluded from this classification are persons engaged in the installation of fire suppression systems in hoods above cooking appliances.

S380 - Swimming Pool and Spa Contractor. On-site fabrication, construction and installation of swimming pools, prefabricated pools, spas, and tubs.

S390 - Sewer and Waste Water Pipeline Contractor. Construction of sewer lines, sewage disposal and sewage drain facilities including excavation and grading with respect thereto, and the construction of sewage disposal plants and appurtenances thereto.

S400 - Asphalt Paving Contractor. Construction of asphalt highways, roadways, driveways, parking lots or other asphalt surfaces, which will include but will not be limited to, asphalt overlay, chip seal, fog seal and rejuvenation, micro surfacing, plant mix sealcoat, slurry seal, and the removal of asphalt surfaces by milling. Also included is the excavation, grading, compacting and laying of fill or base-related thereto.

S410 - Pipeline and Conduit Contractor. Fabrication, construction, and installation of pipes, conduit or cables for the conveyance and transmission from one station to another of such products as water, steam, gases, chemicals, slurries, data or communications. Included are the excavation, cabling, horizontal boring, grading, and backfilling necessary for construction of the system.

S420 - General Fencing, Ornamental Iron and Guardrail Contractor. Fabrication, construction, and installation of fences, guardrails, handrails, and barriers.

S421 - Residential Fencing Contractor. Fabrication and installation of residential fencing up to and including a height of six feet.

S430 - Metal Firebox and Fuel Burning Stove Installer. Fabrication, construction, and installation of metal fireboxes, fireplaces, and wood or coal-burning stoves.

S440 - Sign Installation Contractor. Installation of signs and graphic displays which require installation permits or permission as issued by state or local governmental jurisdictions. Signs and graphic displays shall include signs of all types, both lighted and unlighted, permanent highway marker signs, illuminated awnings, electronic message centers, sculptures or graphic representations including logos and trademarks intended to identify or advertise the user or his product, building trim or lighting with neon or decorative fixtures, or any other animated, moving or stationary device used for advertising or identification purposes. Signs and graphic displays must be fabricated, installed and erected in accordance with professionally engineered specifications and wiring in accordance with the National Electrical Code.

S441 - Non Electrical Outdoor Advertising Sign Contractor. Installation of signs and graphic displays which require installation permits or permission as issued by state and local governmental jurisdictions. Signs and graphics shall include outdoor advertising signs which do not have electrical lighting or other electrical requirements, and in accordance with professionally engineered specifications.

S450 - Mechanical Insulation Contractor. Fabrication, application and installation of insulation materials to pipes, ducts and conduits.

S460 - Wrecking and Demolition Contractor. The raising, cribbing, underpinning, moving, and removal of building and structures so that alterations, additions, repairs, and new sub-structures may be built.

S470 - Petroleum Systems Contractor. Installation of above and below ground petroleum and petro-chemical storage tanks, piping, dispensing equipment, monitoring equipment and associated petroleum and petro-chemical equipment including excavation, backfilling, concrete and asphalt.

S480 - Piers and Foundations Contractor. The excavation, drilling, compacting, pumping, sealing and other work necessary to construct, alter or repair piers, piles, footings and foundations placed in the earth's subsurface to prevent structural settling and to provide an adequate capacity to sustain or transmit the structural load to the soil or rock below.

S490 - Wood Flooring Contractor. Installation of wood flooring including prefinished and unfinished material, sanding, staining and finishing of new and existing wood flooring. Underlayments, non-structural subfloors and other incidental related work.

S491 - Laminate Floor Installation Contractor. Installation of laminate floors including underlayments, non-structural subfloors and other incidental related work, but does not include the installation of sold wood flooring.

S500 - Sports and Athletic Courts, Running Tracks, and Playground Installation Contractor. Installation of sports and athletic courts including but not limited to tennis courts, racquetball courts, handball courts, basketball courts, running tracks, playgrounds, or any combination. Includes nonstructural floor subsurfaces, nonstructural wall surfaces, perimeter walls and perimeter fencing.

S600 - General Stucco Contractor. Applying stucco to lathe, plaster and other surfaces.

S700 - Specialty License Contractor.

(a) A specialty license is a license that confines the scope of the allowable contracting work to a specialized area of construction which the division grants on a case-by-case basis.

(b) When applying for a specialty license, an applicant, if requested, shall submit to the division the following:

(i) a detailed statement of the type and scope of contracting work that the applicant proposes to perform; and

(ii) any brochures, catalogs, photographs, diagrams, or other material to further clarify the scope of the work that the applicant proposes to perform.

(c) A contractor issued a specialty license shall confine the contractor's activities to the field and scope of operations as outlined by the division.

(3)(a) Any person holding a S215 Solar Systems Contractor license before the effective date of this rule may obtain a S202 Solar Photovoltaic Contractor license by submitting an affidavit demonstrating two years of experience that meets the requirements of R156-55a-302b no later than March 31, 2010.

(b) Any person holding a S271 Plastering and Stucco Contractor license before the effective date of this rule shall be issued a S270 General Drywall and Plastering Contractor license.

(c) Any person holding a S274 Drywall Contractor license before the effective date of this rule shall be issued a S270 General Drywall and Plastering Contractor license.

(d) Any person holding a S271 Plastering and Stucco Contractor license or an S270 General Drywall, Stucco and Plastering Contractor license before the effective date of this rule may obtain a S600 General Stucco Contractor license by submitting an affidavit demonstrating two years of experience that meets the requirements of R156-55a-302b no later than March 31, 2010.

(e) Any person holding any of the following licenses before the effective date of this rule shall be issued a S280 General Roofing Contractor license:

(i) S281 Single Ply and Specialty Coating Contractor;

(ii) S282 Build-up Roofing Contractor;

(iii) S283 Shingle and Shake Roofing Contractor;

(iv) S284 Tile Roofing Contractor; and

(v) S285 Metal Roofing Contractor.

 

. . . . . . .

 

KEY: contractors, occupational licensing, licensing

Date of Enactment or Last Substantive Amendment: 2007

Notice of Continuation: November 8, 2006

Authorizing, and Implemented or Interpreted Law: 58-1-106(1)(a); 58-1-202(1)(a); 58-55-101; 58-55-308(1); 58-55-102(35); 58-55-501(21)