No. 29028 (Amendment): R865-19S-85. Sales and Use Tax Exemptions for New or Expanding Operations and Normal Operating Replacements Pursuant to Utah Code Ann. Section 59-12-104

DAR File No.: 29028
Filed: 09/14/2006, 03:33
Received by: NL

RULE ANALYSIS

Purpose of the rule or reason for the change:

S.B. 31 (2006 General Session) amended the criteria for the sales tax exemption for a manufacturing facility. (DAR NOTE: S.B. 31 (2006) is found at Chapter 220, Laws of Utah 2006, and was effective 07/01/2006.)

Summary of the rule or change:

The proposed amendment deletes references to new and expanding operations and normal operating replacements since, under S.B. 31 (2006), those terms are no longer relevant in determining whether purchases by a manufacturing facility are eligible for the exemption.

State statutory or constitutional authorization for this rule:

Section 59-12-104

Anticipated cost or savings to:

the state budget:

None--Any fiscal impacts were taken into account in S.B. 31 (2006).

local governments:

None--Any fiscal impacts were taken into account in S.B. 31 (2006).

other persons:

None--Any fiscal impacts were taken into account in S.B. 31 (2006).

Compliance costs for affected persons:

None--More items are eligible for the sales tax exemption.

Comments by the department head on the fiscal impact the rule may have on businesses:

None--More items are eligible for the sales tax exemption. D'Arcy Dixon, Commissioner

The full text of this rule may be inspected, during regular business hours, at the Division of Administrative Rules, or at:

Tax Commission
Auditing
210 N 1950 W
SALT LAKE CITY UT 84134

Direct questions regarding this rule to:

Cheryl Lee at the above address, by phone at 801-297-3900, by FAX at 801-297-3919, or by Internet E-mail at [e-mail]

Interested persons may present their views on this rule by submitting written comments to the address above no later than 5:00 p.m. on:

10/31/2006

This rule may become effective on:

11/07/2006

Authorized by:

D'Arcy Dixon, Commissioner

RULE TEXT

R865. Tax Commission, Auditing.

R865-19S. Sales and Use Tax.

R865-19S-85. Sales and Use Tax Exemptions for [New or Expanding Operations and Normal Operating Replacements]Certain Purchases by a Manufacturing Facility Pursuant to Utah Code Ann. Section 59-12-104.

[A.](1) Definitions:

[1.](a) "Establishment" means an economic unit of operations, that is generally at a single physical location in Utah, where qualifying manufacturing processes are performed. If a business operates in more than one location (e.g., branch or satellite offices), each physical location is considered separately from any other locations operated by the same business.

[2.](b) "Machinery and equipment" means:

[a)](i) electronic or mechanical devices incorporated into a manufacturing process from the initial stage where actual processing begins, through the completion of the finished end product, and including final processing, finishing, or packaging of articles sold as tangible personal property. This definition includes automated material handling and storage devices when those devices are part of the integrated continuous production cycle; and

[b)](ii) any accessory that is essential to a continuous manufacturing process. Accessories essential to a continuous manufacturing process include:

[(i)](A) bits, jigs, molds, or devices that control the operation of machinery and equipment; and

[(ii)](B) gas, water, electricity, or other similar supply lines installed for the operation of the manufacturing equipment, but only if the primary use of the supply line is for the operation of the manufacturing equipment.

[3.](c) "Manufacturer" means a person who functions within a manufacturing facility.

[4a) "New or expanding operations" means:

(i) the creation of a new manufacturing operation in this state; or

(ii) the expansion of an existing Utah manufacturing operation if the expanded operation increases production capacity or is substantially different in nature, character, or purpose from that manufacturer's existing Utah manufacturing operation.

b) The definition of new or expanding operations is subject to limitations on normal operating replacements.

c) A manufacturer who closes operations at one location in this state and reopens the same operation at a new location does not qualify for the new or expanding operations sales and use tax exemption without demonstrating that the move meets the conditions set forth in A.4.a). Acquisitions of machinery and equipment for the new location may qualify for the normal operating replacements sales and use tax exemption if they meet the definition of normal operating replacements in A.5.

5. "Normal operating replacements" includes:

a) new machinery and equipment or parts, whether purchased or leased, that have the same or similar purpose as machinery or equipment retired from service due to wear, damage, destruction, or any other cause within 12 months before or after the purchase date, even if they improve efficiency or increase capacity.

b) if existing machinery and equipment or parts are kept for backup or infrequent use, any new, similar machinery and equipment or parts purchased and used for the same or similar function.

B.](2) The sales and use tax [exemptions for new or expanding operations and normal operating replacements apply]exemption for the purchase or lease of machinery and equipment by a manufacturing facility applies only to purchases or leases of tangible personal property used in the actual manufacturing process.

[1.](a) The exemptions do not apply to purchases of real property or items of tangible personal property that become part of the real property in which the manufacturing operation is conducted.

[2.](b) Purchases of qualifying machinery and equipment [or normal operating replacements ]are treated as purchases of tangible personal property under R865-19S-58, even if the item is affixed to real property upon installation.

[C.](3) Machinery and equipment [or normal operating replacements ]used for a nonmanufacturing activity qualify for the exemption if the machinery and equipment [or normal operating replacements ]are primarily used in manufacturing activities. Examples of nonmanufacturing activities include:

[1.](a) research and development;

[2.](b) refrigerated or other storage of raw materials, component parts, or finished product; or

[3.](c) shipment of the finished product.

[D.](4) Where manufacturing activities and nonmanufacturing activities are performed at a single physical location, machinery and equipment [or normal operating replacements ]purchased for use in the manufacturing operation are eligible for the sales and use tax exemption [for new or expanding operations or for normal operating replacements ]if the manufacturing operation constitutes a separate and distinct manufacturing establishment.

[1.](a) Each activity is treated as a separate and distinct establishment if:

[a)](i) no single SIC code includes those activities combined; or

[b)](ii) each activity comprises a separate legal entity.

[2.](b) Machinery and equipment [or normal operating replacements ]used in both manufacturing activities and nonmanufacturing activities qualify for the exemption [for new or expanding operations or for normal operating replacements ]only if the machinery and equipment [or normal operating replacements ]are primarily used in manufacturing activities.

[E.](5) The manufacturer shall retain records to support the claim that the machinery and equipment [or normal operating replacements ]are qualified for exemption from sales and use tax under the provisions of this rule and Section 59-12-104.

[F.](6) If a purchase consists of items that are exempt from sales and use tax under this rule and Section 59-12-104, and items that are subject to tax, the tax exempt items must be separately stated on the invoice or the entire purchase will be subject to tax.

 

KEY: charities, tax exemptions, religious activities, sales tax

Date of Enactment or Last Substantive Amendment: [October 13, 2005]2006

Notice of Continuation: April 5, 2002

Authorizing, and Implemented or Interpreted Law: 59-12-104