No. 43422 (Amendment): Rule R156-55b. Electricians Licensing Act Rule  

  • (Amendment)

    DAR File No.: 43422
    Filed: 12/06/2018 10:36:22 AM

    RULE ANALYSIS

    Purpose of the rule or reason for the change:

    This filing is recommended by the Electricians Licensing Board (Board) and the Construction Services Commission (Commission) to clarify current requirements and conform this rule to current practices in the industry. Additionally, this filing removes certain requirements that the Board and the Commission have found to be outdated and unnecessarily arduous.

    Summary of the rule or change:

    In Subsection R156-55b-102(1), these amendments clarify the definition of "electrical work", including a nonsubstantive change to update the citation to Section 58-55-102 and simplifying the description of low voltage cable-type wiring. The amendments to Subsection R156-55b-102(2) are formatting changes for clarity. The amendments to Subsection R156-55b-102(3) clarify that the definition of "minor electrical work" includes HVAC equipment, and that wiring may extend no more than ten feet from an existing outlet or disconnect intended specifically for the piece of equipment, appliance, or machinery. The new Subsection R156-55b-102(4) clarifies that "Premises Wiring" means the same as defined in Title 15A, State Construction and Fire Codes Act. The amendments to Subsection R156-55b-102(7) (formerly Subsection R156-55b-102(6)) simplify and update the definition of "work commonly done by unskilled labor" by deleting references to specific tasks and substituting in their place a reference to work performed by "unlicensed persons". In Section R156-55b-302a, the amendments to this section make nonsubstantive formatting changes to clarify all of the current education and experience requirements for the respective license classifications. This includes describing in Subsection R156-55b-302a(5), the programs approved by the Electricians Licensing Board prior to 01/01/2009. In Section R156-55b-302b, the amendments to this section: 1) make nonsubstantive formatting changes to clarify the current examination requirements for the respective license classifications; 2) extend the 25-day waiting period after a failed exam to a 30-day waiting period, to alleviate confusion and create parity among the standards for all contractor professions; and 3) delete the requirement that an applicant pass all exams within a one-year period (the one-year "rolling clock" requirement), as this restriction was deemed unnecessary and onerous. In Section R156-55b-304, the amendments make formatting changes for clarity, including streamlining this rule by removing duplicative continuing education requirements that are already stated in Section R156-55a-303b. In Subsection R156-55b-401(1), the amendments clarify that an electrical contractor may contract with licensed professional employer organizations to employ one or more licensed electricians. The amendments to Subsection R156-55b-401(2) require an apprentice in the fifth and succeeding years of an apprenticeship to work under immediate supervision, in conformance with the requirements of Subsection 58-55-302(3)(j)(i). In Section R156-55b-501, the amendments update the definition of "unprofessional conduct" to reflect a new standard being implemented across all contractor professions - instead of the licensee being required to carry a copy of their current license at all times, the licensee must provide the license or license number upon request. These amendments also delete as "unprofessional conduct" "failing as an electrical contractor to certify an electrician's hours and breakdown of work experience by category when requested by an electrician who is or has been an employee," as this is a conduct specific to a contractor and will be included as unprofessional conduct in Section R156-55a-501.

    Statutory or constitutional authorization for this rule:

    Anticipated cost or savings to:

    the state budget:

    Most of these proposed changes update definitions and ensure that this rule encompasses current requirements and practices in the profession, and make formatting changes for clarity. Accordingly, none of these amendments will impact state government revenues or expenditures. The amendments to Section R156-55b-302b that extend the 25-day waiting period after a failed exam to a 30-day waiting period are not expected to impact existing state practices or procedures and will therefore have no impact on state government revenues or expenditures. The amendments to Section R156-55b-302b that delete the requirement that an applicant pass all exams within a one-year period (the one-year "rolling clock" requirement), are not expected to impact state government revenues or expenditures as the examinee may still take each exam up to five times per year, and the changes will have no impact on state practices or procedures. No other fiscal impact to the state is expected, beyond a minimal cost to the Division of Occupational and Professional Licensing (Division) of approximately $75 to print and distribute the Electricians Licensing Act Rule once the amendments are made effective.

    local governments:

    These proposed amendments are not expected to change existing local government practices or procedures, and will therefore, have no impact on local government's revenues or expenditures.

    small businesses:

    These proposed changes that update definitions, ensure that this rule encompasses current requirements and practices in the profession, and make formatting changes for clarity, are not expected to impact small businesses as they will not change the quantity or number of exchanges between any persons. The amendments to Section R156-55b-302b that extend the 25-day waiting period after a failed exam to a 30-day waiting period are also not expected to impact small business as the examinee may still take each exam the same amount of times per year. The amendment to Section R156-55b-302b deleting the requirement that an applicant pass all exams within a one-year period (the one-year "rolling clock" requirement) is expected to create a fiscal benefit for the estimated 879 small businesses that may be impacted (NAICS 238212 and 238211). With this change, all applicants for licensure may seek licensure as soon as they have passed all of their exams, regardless of when they passed their exams. Currently, many of these applicants need to retake exams they have already passed because the date they took the exam is outside of the one-year rolling clock period. The applicants therefore experience a significant delay of weeks to months to even years in the ability to obtain their license. Other applicants, in particular apprentice electrician applicants who would like to achieve journeyman electrician status, often give up and never seek to increase their level of licensure because of the perceived difficulty and cost associated with trying to timely pass all of their electrician exams. Accordingly, this proposed amendment is expected to significantly reduce current delays in many individuals becoming licensed, and is also expected to encourage many individuals to become licensed at a higher level. Small businesses will therefore be able to more easily hire journeyman electricians, residential journeyman electricians, master electricians, and residential master electricians. Additionally, newly licensed master electricians may be able to create their own small businesses or serve as qualifiers for other small businesses. The Division estimates that this will result in an ongoing fiscal benefit for small businesses. However, the full impact cannot be estimated because it will depend on the unique licensing and employment choices made by each individual applicant, as well as on the characteristics of each small business, and this relevant data is unavailable and the cost of acquiring the data is prohibitively expensive.

    persons other than small businesses, businesses, or local governmental entities:

    The persons that may potentially be affected by these amendments will be Utah licensed master electricians, residential master electricians, journeyman electricians, residential journeyman electricians, and apprentice electricians engaged in electrical work, and applicants from other jurisdictions who wish to become licensed as residential journeyman electricians or higher in Utah. The proposed changes that update definitions and ensure that this rule encompasses current requirements and practices in the profession and that make formatting changes for clarity are not expected to impact these other persons as the changes will not change the quantity or number of exchanges between any persons. The amendments to Section R156-55b-302b that extend the 25-day waiting period after a failed exam to a 30-day waiting period are also not expected to impact these persons as any examinee may still take each exam the same amount of times per year. The amendment to Section R156-55b-302b deleting the requirement that an applicant pass all licensing exams within a one-year period (the one-year "rolling clock" requirement) is expected to create a fiscal benefit for many of these other persons if it results in their becoming licensed at a higher level, and/or eliminates the cost to them of retaking licensing exams that they have already passed and reduces a delay in their becoming licensed at a higher level. However, the full impact cannot be estimated because it will depend on the unique licensing and employment choices made by each individual person, and this relevant data is unavailable and the cost of acquiring the data is prohibitively expensive.

    Compliance costs for affected persons:

    As described above for other persons, the Division does not anticipate any compliance costs for any affected persons from these proposed amendments because these amendments will result either in no fiscal impact or in a fiscal benefit.

    Comments by the department head on the fiscal impact the rule may have on businesses:

    These proposed amendments are recommended by the Board and the Commission to clarify current requirements and conform the rule to current practices in the industry. Additionally, this filing removes certain requirements that the Board and the Commission have found to be outdated and unnecessarily onerous. Small Business: The proposed changes that update definitions and ensure that the rule encompasses current requirements and practices in the profession, and make formatting changes for clarity, are not expected to impact small business as they will not change the quantity or number of exchanges between any persons. The amendments to Section R156-55b-302b that extend the 25-day waiting period after a failed exam to a 30-day waiting period are also not expected to impact small business as the examinee may still take each exam the same amount of times per year. The amendment to Section R156-55b-302b deleting the requirement that an applicant pass all exams within a one-year period (the one-year "rolling clock" requirement) is expected to create a fiscal benefit for the estimated 879 small businesses that may be impacted (NAICS 238212 and 238211). With this change, all applicants for licensure may seek licensure as soon as they have passed all of their exams, regardless of when they passed their exams. Accordingly, this proposed amendment is expected to significantly reduce current delays in many individuals becoming licensed, and is also expected to encourage many individuals to become licensed at a higher level. Small businesses will therefore be able to more easily hire journeyman electricians, residential journeyman electricians, master electricians, and residential master electricians. Additionally, newly licensed master electricians may be able to create their own small businesses or serve as qualifiers for other small businesses. The Division estimates that this will result in an ongoing fiscal benefit for small business. However, the full impact cannot be estimated because it will depend on the unique licensing and employment choices made by each individual applicant, as well as on the characteristics of each small business, and this relevant data is unavailable. The cost of acquiring the referenced data is prohibitively expensive. The amendments to Section R156-55b-304 make formatting changes for clarity, including streamlining the rule by removing duplicative continuing education requirements that are already stated in R156-55a-303b. These amendments have no fiscal impact to small business. The amendments to Section R156-55b-401 clarify that an electrical contractor may contract with licensed professional employer organizations to employ one or more licensed electricians, and require an apprentice in the fifth and succeeding years of an apprenticeship to work under immediate supervision, in conformance with the requirements of Subsection 58-55-302(3)(j)(i). These amendments have no fiscal impact to small business. The amendments to R156-55b-501 which amend the definition of ?unprofessional conduct? have no fiscal impact to small business. Non-small businesses: There are 26 non-small businesses in Utah in the electrical contracting industry in question (NAICS 238211 and NAICS 238212). The proposed rule changes are expected to have the same fiscal impacts, or lack thereof, as described above in the fiscal impacts for small businesses.

    Francine A. Giani, Executive Director

    The full text of this rule may be inspected, during regular business hours, at the Office of Administrative Rules, or at:

    Commerce
    Occupational and Professional Licensing
    HEBER M WELLS BLDG
    160 E 300 S
    SALT LAKE CITY, UT 84111-2316

    Direct questions regarding this rule to:

    Interested persons may present their views on this rule by submitting written comments to the address above no later than 5:00 p.m. on:

    01/31/2019

    Interested persons may attend a public hearing regarding this rule:

    • 01/30/2019 09:00 AM, Heber Wells Bldg, 160 E 300 S, Conference Room 474 (fourth floor), Salt Lake City, UT

    This rule may become effective on:

    02/07/2019

    Authorized by:

    Mark Steinagel, Director

    RULE TEXT

    Appendix 1: Regulatory Impact Summary Table*

    Fiscal Costs

    FY 2019

    FY 2020

    FY 2021

    State Government

    $0

    $0

    $0

    Local Government

    $0

    $0

    $0

    Small Businesses

    $0

    $0

    $0

    Non-Small Businesses

    $0

    $0

    $0

    Other Person

    $0

    $0

    $0

    Total Fiscal Costs:

    $0

    $0

    $0





    Fiscal Benefits




    State Government

    $0

    $0

    $0

    Local Government

    $0

    $0

    $0

    Small Businesses

    $0

    $0

    $0

    Non-Small Businesses

    $0

    $0

    $0

    Other Persons

    $0

    $0

    $0

    Total Fiscal Benefits:

    $0

    $0

    $0





    Net Fiscal Benefits:

    $0

    $0

    $0

     

    *This table only includes fiscal impacts that could be measured. If there are inestimable fiscal impacts, they will not be included in this table. Inestimable impacts for State Government, Local Government, Small Businesses and Other Persons are described above. Inestimable impacts for Non-Small Businesses are described below.

     

    Appendix 2: Regulatory Impact to Non-Small Businesses (50 or more employees)

    There are 26 non-small businesses in Utah in the electrical contracting industry in question (NAICS 238211, and NAICS 238212). The proposed changes that update definitions and ensure that the rule encompasses current requirements and practices in the profession, and make formatting changes for clarity, are not expected to impact these non-small businesses as they will not change the quantity or number of exchanges between any persons. The amendments to Section R156-55b-302b that extend the 25-day waiting period after a failed exam to a 30-day waiting period are also not expected to impact non-small business as examinees may still take each exam the same amount of times per year. The amendment to Section R156-55b-302b deleting the requirement that an applicant pass all exams within a one-year period (the one-year "rolling clock" requirement) is expected to create a fiscal benefit for these non-small businesses. With this change, all applicants for licensure may seek licensure as soon as they have passed all of their exams, regardless of when they passed their exams. Currently, many of these applicants need to retake exams they have already passed because the date they took the exam is outside of the one-year rolling clock period. The applicants therefore experience a significant delay of weeks to months to even years in the ability to obtain their license. Other applicants, in particular apprentice electrician applicants who would like to achieve journeyman electrician status, often give up and never seek to increase their level of licensure because of the perceived difficulty and cost associated with trying to timely pass all of their electrician exams. Accordingly, this proposed amendment is expected to significantly reduce current delays in many individuals becoming licensed, and is also expected to encourage many individuals to become licensed at a higher level. Non-small businesses will therefore be able to more easily hire journeyman electricians, residential journeyman electricians, master electricians, and residential master electricians. Additionally, newly licensed master electricians may be able to create their own non-small businesses or serve as qualifiers for other non-small businesses. The Division estimates that this will result in an ongoing fiscal benefit for non-small business. However, the full impact cannot be estimated because it will depend on the unique licensing and employment choices made by each individual applicant, as well as on the characteristics of each non-small business, and this relevant data is unavailable and the cost of acquiring the data is prohibitively expensive.

     

    The head of the Department of Commerce, Francine A. Giani, has reviewed and approved this fiscal analysis.

     

     

    R156. Commerce, Occupational and Professional Licensing.

    R156-55b. Electricians Licensing Act Rule.

    R156-55b-102. Definitions.

    In addition to the definitions in Title 58, Chapters 1 and 55, as used in Title 58, Chapter 55 or this rule:

    (1)(a) "Electrical work" as used in Subsection 58-55-102(14)(a) and in this rule means :

    (i) installation, fabrication or assembly of equipment or systems included in ["]Premises Wiring[" as defined by Title 15A, State Construction and Fire Codes Act.];

    (ii) [Electrical work includes ]installation of raceway systems used for any electrical purpose[,]; and

    (iii) installation of field-assembled systems such as ice and snow melting, pipe-tracing, or manufactured wiring systems[, and the like].

    (b) "Electrical work" does not include:

    (i) installation of factory-assembled appliances or machinery that are not part of the [p]Premises [w]Wiring, unless wiring interconnections external to the equipment are required in the field[,]; and [does not include]

    (ii) low voltage cable-type wiring less than 50 volts that does not pose a hazard from a shock or fire initiation standpoint as defined by Title 15A, State Construction and Fire Codes Act.[ Wiring covered by the National Electrical Code that does not pose a hazard as described above includes Class 2 wiring as defined in Article 725, Power-Limited circuits as defined in Article 760 and wiring methods covered by Chapter 8. All other wiring is subject to licensing requirements.]

    (2) "Immediate supervision" as used in Subsection 58-55-102(26) and this rule means[ the following]:

    (a) for industrial and commercial electrical work, the apprentice and the supervising electrician are physically present on the same project or jobsite, but [are ]not required to maintain a direct line of sight[be within sight of one another]; and

    (b) for residential electrical work, the supervising electrician, when not physically present on the same project or jobsite as the apprentice, is available to provide [reasonable ]direction, oversight, inspection, and evaluation of the apprentice's work [of an apprentice ]so as to ensure that the end result complies with applicable standards.

    (3)(a) "Minor electrical work incidental to a mechanical or service installation", as used in Subsection 58-55-305(1)(n), means the electrical work involved in installation, replacement, or repair of HVAC equipment, appliances , or machinery that [utilize]use electrical power, when wiring is extended no more than ten feet from an existing outlet or disconnect intended specifically for the piece of equipment, appliance, or machinery.

    (b) Minor electrical work does not include:

    (i) modification or repair of ["]Premises Wiring[" as defined in the National Electrical Code, and does not include]; or

    (ii) installation of a disconnecting means or outlet.[Electrical work is minor and incidental only when wiring is extended no more than ten feet in length from an outlet or disconnect provided specifically for the piece of equipment.]

    (4) "Premises Wiring" means the same as defined in Title 15A, State Construction and Fire Codes Act.

    ([4]5) "Residential project" as used in Subsection 58-55-302(3)(j)(ii) [pertains]pertaining to supervision, [and ]means electrical work performed in one- or two-family dwellings, including townhouses, as determined by Title 15A, State Construction and Fire Codes Act.

    ([5]6) "Unprofessional conduct" as defined in Title 58, Chapters 1 and 55, is further defined, in accordance with Subsection 58-1-203(1)(e), in Section R156-55b-501.

    ([6]7) "Work commonly done by unskilled labor" as used in Subsection 58-55-102(14)(b)(iii) means work performed by unlicensed persons and includes assisting or handling wire[such as digging, sweeping, hammering, carrying, drilling holes, or other tasks that do not directly involve the installation of raceways, conductors, cables, wiring devices, overcurrent devices, or distribution equipment. Unlicensed persons may handle wire on] large wire pulls involving conduit of two inches or larger [or assist in moving heavy electrical equipment ]when the task is performed under[in] the immediate [presence of and supervised]supervision of a [by ]properly licensed master or[,] journeyman[, residential master or residential journeyman] electrician[s] acting within the scope of [their]the licensee's licenses.

     

    R156-55b-302a. Qualifications for Licensure - Education and Experience Requirements.

    [(1) In accordance with Subsection 58-55-302(3)(i)(i), the approved electrical training program for licensure as a residential journeyman electrician consists of:

    (a) a program of electrical study approved by the Utah Board of Regents, Utah System of Technical Colleges Board of Trustees or other out of state program that is deemed substantially equivalent as determined by the Electricians Licensing Board. Programs approved by the Electricians Licensing Board prior to January 1, 2009 remain approved programs; and

    (b) at least two years of work experience as a licensed apprentice consistent with Section R156-55b-302b.

    (2) In accordance with Subsection 58-55-302(3)(h)(i), the approved four year planned training program for licensure as a journeyman electrician consists of:

    (a) a program of electrical study approved by the Utah Board of Regents, Utah System of Technical Colleges Board of Trustees or other out of state program that is deemed substantially equivalent as determined by the Electricians Licensing Board. Programs approved by the Electricians Licensing Board prior to January 1, 2009 remain approved programs; and

    (b) at least four years of work experience as a licensed apprentice consistent with Section R156-55b-302b.

    (3) A semester of school shall include at least 81 hours of classroom instruction time. A student shall attend a minimum of 72 hours to receive credit for the semester.

    (4) A competency exam shall be given to each student at the end of each semester with the exception of the fourth year second semester. A student, to continue to the next semester, shall achieve a score of 75% or higher on the competency exam. A student who scores below 75% may retake the test one time.

    (5) The applicant shall pass each class with a minimum score of 75%.

    (6) Competency test results shall be provided to the Board at the Board meeting immediately following the semester in a format approved by the Board.

    (7) An applicant for a master electrician license, applying pursuant to Subsection 58-55-302(3)(f)(i) shall be a graduate of an electrical program accredited by the Engineering Accreditation Commission/Accreditation Board for Engineering and Technology (EAC/ABET).

    (8) An applicant shall provide documentation that all education and experience meets the requirements of this rule.]The training and instruction requirements for licensure in Subsection 58-55-302(3) are defined, clarified, or established as follows:

    (1) Master Electrician:

    (a) An applicant under Subsection 58-55-302(3)(f)(i) shall:

    (i) hold a bachelor's or master's degree in electrical engineering from an electrical program accredited by the Engineering Accreditation Commission/Accreditation Board for Engineering and Technology (EAC/ABET); and

    (ii) have at least 2,000 hours (one year) of work experience as a licensed Apprentice Electrician.

    (b) An applicant under Subsection 58-55-302(3)(f)(ii) shall:

    (i) hold an associate's degree in applied science from an electrical trade school course of study that meets the requirements of Subsection (5); and

    (ii) have at least 4,000 hours (two years) of work experience as a licensed Journeyman Electrician.

    (c) An applicant under Subsection 58-55-302(3)(f)(iii) shall have at least 8,000 hours (four years) of work experience as a licensed Journeyman Electrician.

    (2) Residential Master Electrician:

    (a) An applicant under Subsection 58-55-302(3)(g)(i) shall have at least 4,000 hours (two years) of work experience as a licensed Residential Journeyman Electrician.

    (b) An applicant under Subsection 58-55-302(3)(g)(ii) shall:

    (i) hold a bachelor's or master's degree in electrical engineering from an electrical program accredited by the Engineering Accreditation Commission/Accreditation Board for Engineering and Technology (EAC/ABET); and

    (ii) have a least 2,000 hours (one year) of work experience as a licensed Apprentice Electrician.

    (3) Journeyman Electrician:

    (a) An applicant under Subsection 58-55-302(3)(h)(i) shall:

    (i) have successfully completed at least 576 hours (four years, 144 hours per year) of a program of electrical study that meets the requirements of Subsection (5); and

    (ii) have at least 8,000 hours (four years) of full-time work experience as a licensed Apprentice Electrician.

    (b) An applicant under Subsection 58-55-302(3)(h)(ii) shall have at least 16,000 hours (eight years) of full-time work experience as a licensed Apprentice Electrician.

    (4) Residential Journeyman Electrician:

    (a) An applicant under Subsection 58-55-302(3)(i)(i) shall:

    (i) have successfully completed at least 288 hours (two years, 144 hours per year) of a program of electrical study that meets the requirements of Subsection (5); and

    (ii) have at least 4,000 hours (two years) of full-time work experience as a licensed Apprentice Electrician.

    (b) An applicant under Subsection 58-55-302(3)(i)(ii) shall have at least 8.000 hours (four years) of full-time work experience as a licensed Apprentice Electrician.

    (5) In accordance with Subsection 58-55-302(3)(f), (h), and (i), an electrical trade school "course of study" and the planned electrical "training program" approved by the Division, mean a program of electrical study that includes measures of competency and achievement level for each student and:

    (a) is approved by the:

    (i) Utah Board of Regents;

    (ii) Utah System of Technical Colleges Board of Trustees; or

    (iii) Electricians Licensing Board when the program is out-of-state and includes at least 81 hours of classroom instruction per semester;

    (b) Programs approved by the Electricians Licensing Board include the:

    (i) Independent Electrical Contractors of Utah ("IEC"); and

    (ii) Utah Electrical Training Alliance, ("IBEW Local 354").

    (6) "Successful completion" of a training program of electrical study means that the applicant:

    (a) attended a minimum of 72 classroom instruction hours each semester; and

    (b) passed each class with a score of at least 75%.

    (7) As used in Subsection 58-55-302(3) and this rule, "practical electrical experience", "practical experience", "full-time training", and "full-time experience" all mean electrical work experience lawfully performed preceding the date of application, in accordance with supervision requirements and the terms and conditions of Subsections R156-55a-302b(2)(a)(i) through (iii), (b), and (c).

     

    [ R156-55b-302b. Qualifications for Licensure - Work Experience - Residential Journeyman and Journeyman Electricians.

    (1) In order to satisfy Subsections 58-55-302(3)(h) and (i), an applicant for a license as a residential journeyman electrician or journeyman electrician shall document the following on-the-job work experience:

    (a) Residential Journeyman Electrician:

    (i) at least 600 hours in boxes and fittings, conduit, wireways and cableways and associated fittings;

    (ii) at least 3000 hours in wire and cable, individual conductors and multi-conductors cables, and non-metallic sheathed cable;

    (iii) at least 300 hours in distribution and utilization equipment, transformers, control panels, disconnects, motor starters, lighting fixtures, heaters, appliances, motor and other distribution or utilization equipment; and

    (iv) at least 300 hours in specialized work including grounding, wiring of systems for sound, data, communication, alarms, automated systems, generators, batteries and computer equipment.

    (b) Journeyman electrician:

    (i) at least 4000 hours in raceways, boxes and fittings, conduit, wireways, cableways and other raceways and associated fittings, and non-metallic sheathed cable;

    (ii) at least 800 hours in wire and cable, individual conductors and multi-conductor cables;

    (iii) at least 400 hours in distribution and utilization equipment including transformers, panel boards, switchboards, control panels, disconnects, motor starters, lighting fixtures, heaters, appliances, motors and other distribution and utilization equipment; and

    (iv) at least 400 hours in specialized work including grounding, wiring of systems for sound, data, communication, alarms, automated systems, generators, batteries and computer equipment.

    (2) No more than 2000 hours of work experience may be credited for each 12 month period.

    (3) No credit will be given for work experience performed illegally.]

     

    R156-55b-302[c]b . Qualifications for Licensure - Examination Requirements.

    [(1) ]In accordance with Subsection 58-55-302(1)(c)(i)[, an applicant for licensure under this rule shall pass the appropriate examinations that are approved by the Board, each of which shall consist of a theory part, a code part and a practical part as follows]the examination requirements for licensure are established as follows:

    ([a]1) [Utah Electrical Licensing Examination for Master Electricians;]Master Electrician applicants shall pass:

    (a) the Utah Master Electrician Code Exam and Theory Exam; and

    (b) the Utah Electrician Practical Exam.

    ([b]2) [Utah Electrical Licensing Examination for Master Residential Electricians;]Residential Master Electrician applicants shall pass:

    (a) the Utah Residential Master Electrician Code Exam and Theory Exam; and

    (b) the Utah Residential Electrician Practical Exam.

    ([c]3) [Utah Electrical Licensing Examination for Journeyman Electricians; and]Journeyman Electrician applicants shall pass:

    (a) the Utah Journeyman Electrician Code Exam and Theory Exam; and

    (b) the Utah Electrician Practical Exam.

    ([d]4) [Utah Electrical Licensing Examination for Residential Journeyman Electricians.]Residential Journeyman Electrician applicants shall pass:

    (a) the Utah Residential Journeyman Electrician Code Exam and Theory Exam; and

    (b) the Utah Residential Electrician Practical Exam.

    ([2]5) Admission to the exam[ination]s is permitted after:

    (a) the applicant has completed all requirements for licensure [set forth ]in Section[s] R156-55b-302a[and R156-55b-302b]; or

    (b) the journeyman applicant under Subsection R156-55b-302a(3)(a) has completed:

    (i) the [apprentice education ]program of electrical study[set forth in Subsection R156-55b-302a]; and

    (ii) [not less than]at least 6,000 hours of the required full-time work experience[required under Subsection R156-55b-302b]; or

    (c) the residential journeyman applicant under Subsection R156-55b-302a(4)(a) has completed:

    (i) the [apprentice education ]program of electrical study[set forth in Subsection R156-55b-302a]; and

    (ii) [not less than ]at least 3,000 hours of the required full-time work experience[required under Subsection R156-55b-302b].

    ([3]6) [The]An applicant shall obtain :

    (a) a "pass" grade on the Practical Exam;[practical part of the examination,]

    (b) a score of at least 75% on the Theory Exam;[theory part] and

    (c) a score of at least 75% on the Code Exam[code part of the examination].

    [(4)(a) If an applicant fails one or more parts of the examination, the applicant shall retake any part of the examination failed.

    (b) An applicant shall wait at least 25 days between the first two retakes and thereafter shall wait 120 days between retakes.

    (5) If an applicant passes any part of the examination but does not pass the entire examination, the passing score on any part of the examination shall be valid for one year from the date the part of the examination was passed. Thereafter, the applicant shall retake any previously passed part of the examination.]

    (7) An applicant who fails an exam may retake that exam:

    (a) no sooner than 30 days following any failure, up to three failures; and

    (b) no sooner than 120 days following any failure thereafter.

     

    R156-55b-304. Continuing Education - Standards.

    Standards for continuing education shall be in accordance with R156-55a-303b(1)(e) and (2) through (10), except as otherwise provided in this section.

    (1) Required Hours. Pursuant to Sections 58-55-302.7 and 58-55-303, each licensee shall complete at least 16 hours of continuing education during each two-year[two year] license term. [A minimum of]At least 12 hours shall be core education. The remaining four hours may be professional or core education.

    (2) "Core continuing education" is defined as education covering the National Electrical Code as adopted or proposed for adoption.

    (3) "Professional continuing education" is defined as education covering:

    (a) National Fire Protection Association 70E (NFPA 70E), Occupational Safety and Health Administration (OSHA), or Mine Safety and Health Administration (MSHA);

    (b) electrical motors and motor controls;

    (c) [, ]electrical tool usage; [and]or

    ([c]d) supervision skills related to the electrical trade.

    [(4) Non-acceptable course subject matter includes the following types of courses and other similar courses:

    (a) mechanical office and business skills, such as typing, speed reading, memory improvement and report writing;

    (b) physical well-being or personal development, such as personal motivation, stress management, time management, or dress for success;

    (c) presentations by a supplier or a supplier representative to promote a particular product or line of products; and

    (d) meetings held in conjunction with the general business of the licensee or employer.]

    ([5]4) The Division may defer or waive continuing education requirements for:

    (a) [waive the continuing education requirements for a licensee that is ]an instructor of a[n approved apprenticeship] program of electrical study under R156-55b-302a(5);[or]

    (b) a board member who regularly attends Electricians Licensing Board meetings; and

    (c) any licensee [waive or defer the continuing education requirements] as provided in Section R156-1-308d.

    [(6) A continuing education course shall meet the following standards:

    (a) Time. Each hour of continuing education course credit shall consist of at least 50 minutes of education in the form of seminars, lectures, conferences, training sessions or distance learning modules. The remaining ten minutes may be used for breaks.]

    ([b]5) Provider. [The]A course provider need not be listed in Subsection 58-55-302.5(2), but shall meet the other requirements of this section and [shall] be[one of the following]:

    ([i]a) a recognized accredited college or university;

    ([ii]b) a state or federal agency;

    ([iii]c) a professional association or organization involved in the construction trades; or

    ([iv]d) a commercial continuing education provider providing a program related to the electrical trade.

    ([c]6) Content. [The]Course content [of the course ]shall be relevant to the practice of the electrical trade and consistent with [the]Utah laws and rules[of this state].

    [(d) Objectives. The learning objectives of the course shall be reasonably and clearly stated.

    (e) Teaching Methods. The course shall be presented in a competent, well organized and sequential manner consistent with the stated purpose and objective of the program.

    (f) Faculty. The course shall be prepared and presented by individuals who are qualified by education, training and experience.

    (g) Distance learning. A course may be recognized for continuing education that is provided through internet or home study courses provided that the course verifies registration and participation in the course by means of a passing a test demonstrating that the participant has learned the material presented. Test questions shall be randomized for each participant.

    (h) Documentation. The course provider shall have a competent method of registration of individuals who actually completed the course, shall maintain records of attendance that are available for review by the Division and shall provide to individuals completing the course a certificate which contains the following information:

    (i) the date of the course;

    (ii) the name of the course provider;

    (iii) the name of the instructor;

    (iv) the course title;

    (v) the hours of continuing education credit;

    (vi) the attendee's name;

    (vii) the attendee's license number; and

    (viii) the signature of the course provider.

    (7) On a random basis, the Division may assign monitors at no charge to attend a course for the purpose of evaluating the course and the instructor.

    (8) Each licensee shall maintain adequate documentation as proof of compliance with this section, such as certificates of completion, course handouts and materials. The licensee shall retain this proof for a period of three years from the end of the renewal period for which the continuing education is due. Each licensee shall assure that the course provider has submitted the verification of attendance to the continuing education registry on behalf of the licensee as specified in Subsection (11). Alternatively, the licensee may submit the course for approval and pay any course approval fees and attendance recording fees.

    (9) Licensees who lecture in approved continuing education courses shall receive two hours of continuing education for each hour spent lecturing. However, no lecturing or teaching credit is available for participation in a panel discussion.

    (10) A course provider shall submit continuing education courses for approval to the continuing education registry and shall submit verification of attendance and completion on behalf of licensees attending and completing the program directly to the continuing education registry in the format required by the continuing education registry.

    (11) The Division shall review continuing education courses which have been submitted through the continuing education registry and approve only those courses which meet the standards set forth under this section.

    (12) Continuing Education Registry.

    (a) The Division shall designate an entity to act as the Continuing Education Registry under this rule.

    (b) The Continuing Education Registry, in consultation with the Division and the Commission, shall:

    (i) through its internet site electronically receive applications from continuing education course providers and shall submit the application for course approval to the Division for review and approval of only those programs which meet the standards set forth under this section;

    (ii) publish on its website listings of continuing education programs which have been approved by the Division, and which meet the standards for continuing education credit under this rule;

    (iii) maintain accurate records of qualified continuing education approved;

    (iv) maintain accurate records of verification of attendance and completion, by individual licensee, which the licensee may review for compliance with this rule; and

    (v) make records of approved continuing education programs and attendance and completion available for audit by representatives of the Division.

    (c) Fees. The Continuing Education Registry may charge a reasonable fee to continuing education providers or licensees for services provided for review and approval of continuing education programs.]

     

    R156-55b-401. Conduct of Apprentice and Supervising Electrician.

    [(1) The conduct of licensed apprentice electricians and their licensed supervisors shall be in accordance with]The requirements of Subsections 58-55-302(3)(j) and 58-55-102(34) are clarified as follows:[, Sections 58-55-501, 58-55-502, and R156-55b-501.]

    [(2) For the purposes of Subsections 58-55-102(31), 58-55-302(3)(j) and 58-55-501(12), one of the following shall apply:

    (a) the supervisor and apprentice employees shall be employees of the same electrical contractor;

    (b) the](1) An electrical contractor may comply with supervision and ratio requirements by contracting[contract] with a licensed professional employer organization to employ one or more licensed electricians[such persons].

    ([3]2) An apprentice in the fifth[fourth through sixth year of training may work without supervision for a period not to exceed eight hours in any 24-hour period. In the seventh] and succeeding years of training[, the nonsupervision provision no longer applies and the apprentice] shall be under immediate supervision[as set forth in Subsection 58-55-302(3)(j)].

     

    R156-55b-501. Unprofessional Conduct.

    "Unprofessional conduct" includes:

    (1) failing [as a licensee ]to comply with the supervision requirements established by Subsection 58-55-302(3)(j).

    (2) failing [as a licensee to carry a copy of a]to timely provide upon request the licensee's current electrician license or license number[at all times] when performing electrical work; or

    (3) [failing as an electrical contractor to certify an electrician's hours and breakdown of work experience by category when requested by an electrician who is or has been an employee; and

    (4) ]failing as a licensee to provide proof of completed continuing education within 30 days of the Division's request.

     

    KEY: occupational licensing, licensing, contractors, electricians

    Date of Enactment or Last Substantive Amendment: [March 27, 2017]2019

    Notice of Continuation: August 8, 2016

    Authorizing, and Implemented or Interpreted Law: 58-1-106(1)(a); 58-1-202(1)(a); 58-55-308(1)


Document Information

Hearing Meeting:
01/30/2019 09:00 AM, Heber Wells Bldg, 160 E 300 S, Conference Room 474 (fourth floor), Salt Lake City, UT
Effective Date:
2/7/2019
Publication Date:
01/01/2019
Type:
Notices of Proposed Rules
Filed Date:
12/06/2018
Agencies:
Commerce, Occupational and Professional Licensing
Rulemaking Authority:

Subsection 58-1-202(1)(a)

Subsection 58-1-106(1)(a)

Subsection 58-55-308(1)

Authorized By:
Mark Steinagel, Director
DAR File No.:
43422
Summary:
In Subsection R156-55b-102(1), these amendments clarify the definition of "electrical work", including a nonsubstantive change to update the citation to Section 58-55-102 and simplifying the description of low voltage cable-type wiring. The amendments to Subsection R156-55b-102(2) are formatting changes for clarity. The amendments to Subsection R156-55b-102(3) clarify that the definition of "minor electrical work" includes HVAC equipment, and that wiring may extend no more than ten feet from ...
CodeNo:
R156-55b
CodeName:
{34090|R156-55b|R156-55b. Electricians Licensing Act Rule}
Link Address:
CommerceOccupational and Professional LicensingHEBER M WELLS BLDG160 E 300 SSALT LAKE CITY, UT 84111-2316
Link Way:

Steve Duncombe, by phone at 801-530-6235, by FAX at 801-530-6511, or by Internet E-mail at sduncombe@utah.gov

AdditionalInfo:
More information about a Notice of Proposed Rule is available online. The Portable Document Format (PDF) version of the Bulletin is the official version. The PDF version of this issue is available at https://rules.utah.gov/publicat/bull_pdf/2019/b20190101.pdf. The HTML edition of the Bulletin is a convenience copy. Any discrepancy between the PDF version and HTML version is resolved in favor of the PDF version. Text to be deleted is struck through and surrounded by brackets ([example]). Text ...
Related Chapter/Rule NO.: (1)
R156-55b. Electricians Licensing Rules.